BMW 3-Series (E90 E92) Forum

BMW 3-Series (E90 E92) Forum (https://www.e90post.com/forums/index.php)
-   UK (https://www.e90post.com/forums/forumdisplay.php?f=22)
-   -   Brake discs with anti corrosion paint. (https://www.e90post.com/forums/showthread.php?t=1255232)

Gear Head 04-27-2016 01:46 PM

Brake discs with anti corrosion paint.
 
I will be needing new discs and pads all round on my 325i soon.
Which suppliers offer discs with anti corrosion protection? Hate rusty hubs!

windymissile 04-27-2016 03:03 PM

I just painted my oem ones. My EBc ones haven't corroded yet (1 year).

WM

abeardo83 04-27-2016 03:39 PM

Mtec brakes do ones with a coating on. Good value too

Gear Head 04-27-2016 09:02 PM

Looked mtec but they don't seem to offer plain discs.

OGM2LCI 04-28-2016 01:35 AM

Fitted Pagid on the front of mine nearly a year ago and still no corrosion, however the stories of Pagid may put you off

Fitted Eicher to the rear less than six months ago and within a week they were bright orange, hopeless, going to take them all off soon and coat them in something

MAN15H 04-28-2016 01:58 AM

I have the Zimmerman perforated discs with coat Z. Rears have been on the car since last December and the fronts since around July last year and the hubs are still the same as when I put them on no corrosion at all. I would recommend these discs.

http://www.otto-zimmermann.de/en/pro...sscheiben.html

Phil325i 04-28-2016 02:16 AM

Jurid are zinc coated and OEM...

Dann 04-28-2016 02:19 AM

I buy OEM and just paint all the hubs and edges with a decent etch primer (with high zinc content) before fitting.
After that, they never go rusty and still look OEM

AzRiz 04-28-2016 04:10 AM

Brembo do them, I fitted them on all 4 corners a few months ago. EuroCarParts supplied them, you'll see the charcoal-coloured "UV coating" on them in the pic.

jimbo666 04-28-2016 08:46 AM

A coat of silver hammerite left to dry before installation on them has done me right so far.

Gear Head 04-29-2016 02:33 PM

Quote:

Originally Posted by MAN15H (Post 19838750)
I have the Zimmerman perforated discs with coat Z. Rears have been on the car since last December and the fronts since around July last year and the hubs are still the same as when I put them on no corrosion at all. I would recommend these discs.

http://www.otto-zimmermann.de/en/pro...sscheiben.html

Any idea of stockists?

Nickos 04-30-2016 12:58 AM

I painted mine with hammerite when I did the calipers, does the job nicely.

MAN15H 04-30-2016 03:36 PM

Quote:

Originally Posted by Gear Head (Post 19848311)
Any idea of stockists?

Grab the exact part number from the manufacturers website as they have an online catalogue then google that number you should see links for resellers on ebay, where I brought mine from, and Amazon.de etc...

Very reasonably priced and very good quality.

I've coupled mine with akebono pads for a killer combo as the pads produce very little brake dust and the stopping power is very good.

Gear Head 05-01-2016 12:47 PM

Cheers mate. What sort of money did you pay for the full set? Looking on Amazon and eBay, I'm looking at around £400!

MAN15H 05-03-2016 01:59 AM

Rears £159 for the pair

http://www.ebay.co.uk/itm/ZIMMERMANN...3D201258285299


Couldn't find the fronts on ebay at the mo but found them on the following site listed as £92 which I guess is per disc.

http://www.sparepartstore24.co.uk/1738754-zimmermann

Same shop lists the rears for £84 each.

http://www.sparepartstore24.co.uk/1738736-zimmermann

These are for the 335 so the ones for your car might be less just check the part numbers before you order anything.


All times are GMT -5. The time now is 01:10 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST