Metric up to 22mm (sockets and wrenches), Torx, Inverted Torx, extensions and swivel joints, 3/8 & 1/2 ratchets, 1/2 breaker bar, 3/8 low torque wrench, 1/2 higher torque wrench, 3/8-1/2 adapter, 1/2-3/8 adapter, metric allen keys, 22mm crowfoot, 8mm hex socket, spindle spreader, manual oil transfer pump, and plenty of PB blaster.
I use pieces of wood to adapt the jack pads to my jack stands. Don't use anything fancy, same blue whatevers that I got years ago from a local store. Race Ramps would probably make some things a lot easier.
