Quote:
Originally Posted by Kooshi3
I had to dig in on the Dinan website a little more to better understand as they have over 10 part numbers/iterations for this same product on the e90/e92 platform. This is very odd because if you look at other makers of oil coolers for this platform, they only offer 1 type for the 335i even when enclosures are provided, regardless if you have an e90 an e92 an e93 or if you are pre lci or lci.
According to Dinan, this oil cooler is specifically made for the 2009-2010 e90 335i or 335xi.
There are two different part numbers for the 2011+ e90's, one for the m-tech bumper and one with the standard bumper. The part make ups do look the same with respect to the adapter, oil cooler and lines. The difference may stem from the housing that routes the air into the cooler, but I am not 100% sure on this.
I can follow up with Dinan to get a better answer specifically what that difference is to see if this will work for you and if so, what you would need to make it work.
Sincerely,
-Kooshi3
|
Ok I did see that just now too on the slight variations. If you can look into what parts I need to buy additionally to make it work on my E90 with Mtech bumper I'd appreciate it. I plan on getting their stage 3 tune this next week which requires an oil cooler. Thanks again!