Quick update, I fixed the issue. I suggest getting a new accelerator module to fix issue. Or tightening the ground on the passenger strut if you have a 2D20 error. My issue ended up being a wiring harness i put near the dme which made it throw the error. Move it out of the black protector box and zip tie it to something else if you have one(mine was a wiring harness[p&p] for custom headlights), or just move it away from the area in general.
Quote:
Originally Posted by TunafishE93
According to ISTA your readings are within specs. You say it happens when hitting bumps, i would be chasing down wiring short. To do this i would start with the pedal position sensor wires. Run a jump wire from pedal to DME one at time to see if issue resolve, if it does you know the issue is with that wire.. You can run the jump outside for quicker diagnostics and then run a permit wire once you find which one it is..
I know lots of hacking but thats what i would do if i was in your postion.
|
Thank you for the response/advice Tuna, if all of the solutions i mentioned didn't work I would suggest this as the next step!