Quote:
Originally Posted by MPR
The amp I use, Sundown Audio SFB-1000D, is super small and while marketed as 1000w @ 1 ohm, it dynos in at around 1,400w. Williston Audio on YouTube created a video on it. It's a full bridge design so you have to set it up correctly or it will give you problems, and you will need an LOC.
It has a max input voltage of 5v, so I used a dmm to set the LC2i Pro LOC output to around 4.9v, which allows me to keep the amp gain at the bare minimum.
Do you already have a ported box? If not, you can squeeze more output from your setup by switching enclosures.
|
Thanks, it is a sealed box, good point, I'll see what ported options I can find.