Quote:
Originally Posted by cheerio
Great to see someone giving it a go!
I think you might be better off using E84 coding/firmware instead of E70; the E70 seems to be set up differently to the E89 family.
Flash an E84 ZB to the EGS. IIRC, when I tried this it seemed to work aside from a DSC code. You shouldn't have to mess around with a E70 CAS. Use a JBBFE 3 from a late E90 or perhaps an E84. E84 electronic shifter should work once wired up.
Thanks for being the guinea pig and testing this out, I'm keen to hear how it goes.
|
So far still no go. I loaded the .opa files 7650054a.opa and 7650056a.opa in ida pro and although i dont have the skill set to do much there, iam able to see they are both programetand e70. So i can load any config for e70 or e84. I still haven't gotten winkfp to work and flash anything unfortunately. I still have the vin on the cas as an e70 because i was hoping to use xhp to flash but xhp wont connect at all. So far ive lost more ground than I've gained.
Also tool 32 is saying ews not challenged and im not sure why? Not passing not failing not even trying i might have to put the motor back in the car and try to start it to see if i can get out of park.