Quote:
Originally Posted by Stucks
If I wanted to just simplify things and run a square setup with 255/40/18s, What 18x8.5 or 18x9 offset would achieve the best flush visual while avoiding too much poke? I see 18x9 et30 all the time on here, but do you think it might poke too much with that tire size?
|
255/40/18 @ ET30 will poke, especially up front.
for a 255/40/18 to be flush the offset needs to be around ET38 front, ET35 rear
255/40/18 lightly stretched on 18x9.5 ET35 square is also possible. in this case the lip will be 1.3mm more poke than the 9" ET30 but the tire shoulder will have 5mm less poke due to 5mm higher offset.
lately, there's a few of you asking the same fitment questions and i've grown tired of linking specific posts. this apex thread contains members with specs that you may be considering to determine poke/flush/etc...
https://f30.bimmerpost.com/forums/sh....php?t=1393886