View Single Post
      10-09-2010, 12:54 PM   #398
Jeff@TopGearSolutions
Jeff@TopGearSolutions's Avatar
United_States
3486
Rep
79,210
Posts

Drives: C6 Z06, 09 335i, 10 335xi
Join Date: Dec 2008
Location: www.TopGearSolutions.com

iTrader: (37)

Quote:
Originally Posted by techlogik View Post
Many of us have already posted that.

But this thread brings up once gain, once Shiv and Mike (on behalf of Terry) start posting to describe in detail and debate the methods things are accomplished with each piggback.

Both of their posts should make it so obvious and clear who has the more sophisticated tune, knowledge, experience, and is way ahead of everybody that the debates should end. But they don't.

Yes, the thread has veered off course to a degree, but it was based off BMS who posted the "warning" about high boost and meth on his forum which then lead to this thread.

This of course began the debate and some speculation. But the thread has primarily been a discussion about at high boost levels, how each tuner is handling timing, throttle, fuel etc...to avoid (try to avoid) the scenario which started the thread.

I've always said, will say it again, since when is running meth a safe endeavor? It isn't! There are risk.

Now that we now the risk, how is each tuner handling the risk?!?!

We know mostly how Shiv and Procede handle it. We also know JB/resistor tuner Terry and how he tries to handle it.

I think the debate and info here is valuable to those so they can clearly understand how each tune works (of course Shiv is giving up his entire aresenal and secrets, don't blame him) but he gives enough to make people aware and knowledgeable so you can't say..."I didn't know that."

Sevak obvsiouly knew this, and the risk..so what, he blew his engine, his problem, not mine. But for others who may be faced with this idea of running meth, high boost etc...here is some valuable information for you right in this thread to make it obvious who your piggback tuner should be.

I'd agree with 90% of that... but you know what your reading to decipher that.

Average joe coming in here will just be bombarded with technical names and jargon and have no clue what all that crap means.

Its like every answer beats around the bush and you have to extrapolate meanings of things and look beyond the scope of what is written to understand what is going on.

Kind of like this post I'm making right now, only a few people no what I want to say, but I wont say it directly.

Appreciate 0