According to my math, this should correct the bub out error on the low beams;
OEM Halogens = 55W
HID = 35W
therefore need to add 20W to the circuit to trick the on-board computer to seeing a total of 55W.
At 13.8W, need to added a 10 ohm/20watt resistor in parallel.
Going to order one of these to test;
http://search.digikey.com/scripts/Dk...me=12M16-10-ND
http://search.digikey.com/scripts/Dk...MP820-10.0F-ND