View Single Post
      09-15-2022, 08:19 PM   #4
ashkanvafaee2
Private First Class
41
Rep
104
Posts

Drives: 2016 340i
Join Date: Feb 2020
Location: Austin, TX

iTrader: (0)

I pulled back driver-side wheel well and inspected the 2 wires for the antenna. Everything looked fine.

I disconnected battery and did a continuity test on the 2 wires for the driver and passenger side antennas. Did not get a signal on either one. Checked the resistances and both read about 300k ohm.

It looks like both antenna and wire are fine.. which leaves the comfort access module. I'm still skeptical if this is the real issue though. Anyone else run into this problem?
Appreciate 0