Quote:
Originally Posted by mzimand
That was what I was hoping to hear. I hate using spacers.
Your fitment looks perfect. I want to duplicate it on my car
Can you confirm the wheel sizes.
The stock fronts are 9.5J x 19” ET20mm with 275/35-19 tyres
If you are only going with a +8 does that mean the ET is 8mm or 28mm(20 stock +8mm)?
*I am not an expert in this subject so if my question is dumb I apologize)
Didi
|
He wrote his offsets backwards.
Fronts are 19x9.5 +5, the rears are 20x11 +8.
In this case with the stock wheels that's the equivalent of running a 15mm spacer up front (going from +20 to +5). I'm doing the same wheels but 19x10 +11 front, which is the same fitment on the fender size. Each half inch added to wheel width is like subtracting 6 from the offset. 1"=12mm, 6mm inside, 6mm fender side.
Rears go from 20x10.5 +20 stocks to these being 20x11 +8. So -6 for the 0.5" width increase, and a -12 offset decrease, bringing it to the equivalent of running an 18mm spacer in the rear w/ stocks.
To summarize, his fitment is like running +15F, +18R spacers with stock wheels.
Hope this makes sense!