Quote:
Originally Posted by DaveDee
Quote:
Originally Posted by CTGT2005
Same here! Would love to see someone stuff a 295/30/19 on a 10" wheel in back and a 265/35/19 on 9" up front. Keep us posted guys!
|
After spending a stupid amount of time researching this a good calculator:
https://tiresize.com/comparison/
The 265/295 comparison is a tad out (1.1%) difference in diameter for X- Drive requirements but 295/30. /255/35 is the identical diameter and perfect for X drive require specs but the fitment of 295s on the back was too ambitious according to the guys who did all the measurements.
285/30 and 245/35 is the best all around match with a tight fitment on a 10" and 8.5" wheel. I'm guessing this won't look to shabby |
Agree as I have 285/35 and 245/40 both raise the car identical 11mm and zero rubbing. However, with an aggressive lowering (35mm front and 30mm rear) and 12mm front spacers you'll get slight rub near locked steering wheel. Love the look though vs the 30/35 stretched combo. Some minor trimming should take care of the front rub.