Quote:
Originally Posted by Milk1010
I’m just as confused as to why you can’t code in that function. I’d understand bmw not allowing to from factory but I’m surprised nobody has found a way to code it in.
|
I didn’t go check again, but did you check that both options are set?
Lighting
- Automatic light control
The lighting switch position where the automatic light control is active. To prevent the low beam to come on when the switch is set to “0”, use the option “Active in position A”.
Values:
Active in position A
Active in position A and 0
Requirements:
“Body Domain Controller” BDC_BODY3 control unit
This coding is only possible with one of the OBD adapters listed here.
- Exterior lighting switch-off allowed
Allow the exterior lights to be turned off when the engine is running.
Values:
Active
Not active
Requirements:
“Body Domain Controller” BDC_BODY3 control unit
This coding is only possible with one of the OBD adapters listed here.