This works great and in my testing is very accurate for low torque applications such as the oil drain plug and filter housing cap. Most 100 ft-lb wrenches like you use for your wheels don't even go as low as the 25 n-m= 18 ft-lb = 216 in-lbs required for these, and if they do they are probably very inaccurate. My in-lbs wrench only goes to 200.
This thing is great because it starts to give warning beeps when you get close, then a solid tone when you reach what you have set. It shows the torque you are applying constantly, but you don't need to watch it if you don't want to.
https://www.harborfreight.com/38-in-...ter-58705.html