|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Bluetooth retrofit and combox
|
|
09-16-2024, 01:16 PM | #1 |
Private First Class
32
Rep 172
Posts |
Bluetooth retrofit and combox
Hi,
Hope this is the right forum. I recently retrofitted a cic idrive system taken from my friend's 2011 328i car onto my 2011 335i. His car has a combox and usb/aux( 6FL) while mine does not have any wiring for tcu or mulf or bluetooth and only has an aux input in the armrest. I see there is a MMI box I can get or a new screen with carplay but I wan't to eliminate aux input and use bluetooth so I can use my steering wheel controls and retain the oem idrive streaming services like spotify etc. I see these units use the aux input to push audio in? I have the HIFI system but I feel like it does not sound good with aux. How would I go about wiring it up? My current CIC idrive wiring was spliced into the cic screen connector to retain simplicity so it only comes down to 4 wires to go into the front JBE connector. |
Yesterday, 07:42 PM | #2 |
Private First Class
32
Rep 172
Posts |
Update:
Pulled out the combox wiring harness from my friends car, combox, bluetooth, usb aux, phone cradle, usb/aux fakra cables and mic with mic wire. Planning to retrofit it this week. I want to use the passenger side to place the harness and use the MOST bus on the drivers side. I have pulled the MOST connector also but how would I wire it up? My E90 already has a MOST bus system since it had the connector in the quadlock but I will check to confirm it tommorow. I have the TOP HIFI amp option so there should be a most bus system. How would I use the MOST connection for the combox? |
Appreciate
0
|
Bookmarks |
Tags |
bluetooth audio, combox cic streming bluetooth, combox retrofit |
|
|