[Tambohamilton]

To be honest, I strongly recommend bimmergeeks protool for this. It's so much simpler than NCS. NCS blows my mind!

[Vinboo]

Originally Posted by Tambohamilton

VO is the Vehicle Order. It's a list of all options on the car. It's stored in the CAS and FRM. You use NCS Expert to load it from either location, then edit the options, then save it back to both locations, then default code to propagate those settings to all other modules. https://g42.bimmerpost.com/forums/showthread.php?t=1893721

So you need to set the new engine type in the VO in CAS and FRM, then default code the car so that all other modules are updated accordingly. That should solve your immediate issues with the DME.

Do you have the complete NCS Expert can be send it to me? I can pm you 🥲

[Vinboo]

Originally Posted by Tambohamilton

To be honest, I strongly recommend bimmergeeks protool for this. It's so much simpler than NCS. NCS blows my mind!

Well, bimmergeeks' downloads are no longer available, all these program were found in those hidden free communities, or else I would never be able to get these tools😭

[3PedalJake]

Originally Posted by Vinboo

Do you have the complete NCS Expert can be send it to me? I can pm you 🥲

Sent you a pm. NCS is part of bmw standard tools.

[Tambohamilton]

Originally Posted by Vinboo

Well, bimmergeeks' downloads are no longer available, all these program were found in those hidden free communities, or else I would never be able to get these tools😭

Protool is on the android play store. It's not free, though...

[Vinboo]

What if I use ista+ to code? NCX Expert is kinda~ dunno what to say🤣. I have been studying that application for like a complete whole day, but still don't really know how it work.

[NZE90]

Originally Posted by Vinboo

What if I use ista+ to code? NCX Expert is kinda~ dunno what to say🤣. I have been studying that application for like a complete whole day, but still don't really know how it work.

You can't code an E series vehicle with ISTA D or + You need ISTA P for that which is a completely different program. NCS expert is pretty easy once you are familiar with it.

[Tambohamilton]

Originally Posted by Vinboo

What if I use ista+ to code? NCX Expert is kinda~ dunno what to say🤣. I have been studying that application for like a complete whole day, but still don't really know how it work.

This is why I use protool. I don't use NCS often enough to remember how it works, and I really dont have the time/energy to learn every time.

I'd message bimmergeeks support and ask if protool can change the power class. If it can, then you pay for the software (permanent license), your problem is fixed and you always have that software for diagnostics or coding in future. Well worth it IMO.

[NZE90]

I've just read the whole thread on this. The bad news is you can't change the powerclass in the DME with NCS expert or Protool or any other program that i know of.

What file did you use to flash your DME? Did you flash the Bimmerlabs RSA delete first?

When i did my 323i to 325i DME flash, i had to use the RSA delete first.