[Tambohamilton]

To be honest, I strongly recommend bimmergeeks protool for this. It's so much simpler than NCS. NCS blows my mind!

[Vinboo]

Originally Posted by Tambohamilton

VO is the Vehicle Order. It's a list of all options on the car. It's stored in the CAS and FRM. You use NCS Expert to load it from either location, then edit the options, then save it back to both locations, then default code to propagate those settings to all other modules. https://g42.bimmerpost.com/forums/showthread.php?t=1893721

So you need to set the new engine type in the VO in CAS and FRM, then default code the car so that all other modules are updated accordingly. That should solve your immediate issues with the DME.

Do you have the complete NCS Expert can be send it to me? I can pm you 🥲

[Vinboo]

Originally Posted by Tambohamilton

To be honest, I strongly recommend bimmergeeks protool for this. It's so much simpler than NCS. NCS blows my mind!

Well, bimmergeeks' downloads are no longer available, all these program were found in those hidden free communities, or else I would never be able to get these tools😭

[3PedalJake]

Originally Posted by Vinboo

Do you have the complete NCS Expert can be send it to me? I can pm you 🥲

Sent you a pm. NCS is part of bmw standard tools.

[Tambohamilton]

Originally Posted by Vinboo

Well, bimmergeeks' downloads are no longer available, all these program were found in those hidden free communities, or else I would never be able to get these tools😭

Protool is on the android play store. It's not free, though...