Remus muffler install for my 328

UdubBadger · 03-13-2008, 11:57 PM

Anyone know whats required for this?

my car is leased and i'm doing mods that are only reversible, however plan to purchase my car at the end of the lease (assuming its not totally over priced).

I have read on a few exhaust posts that you have to cut the OEM muffler off to install the after market ones. Any way around this or any suggestions on how to mod the Remus so its just the same as my OEM and can remove it at some connection point of the exhaust. (I don't really know what it looks like down there buy most of my other cars have had a bolt on point somewhere along the line).

PLEASE HELP!

Deadkookaburra · 03-14-2008, 12:17 AM

it should be a bolt on mod. no wielding or cutting required. that's the case for my sebring...however the low end of that exhaust was so bad that i gave it up

UdubBadger · 03-14-2008, 01:35 AM

lets hope cuz if not i might just...

AH · 03-14-2008, 01:40 AM

Bolt on for my 320i Remus.

voltron1011 · 03-14-2008, 04:39 PM

You can change it to a bolt on.. You'll just need to cut the original and weld a flange onto it, the new muffler, and the exhaust pipe itself.

UdubBadger · 03-14-2008, 08:46 PM

Quote:

Originally Posted by voltron1011

You can change it to a bolt on.. You'll just need to cut the original and weld a flange onto it, the new muffler, and the exhaust pipe itself.

well that doesn't really make any sense if i did that... not really gaining anything from it.

i finally looked under the car today and saw the OEM muffler isn't bolted on like i thought it might have been so I'm just gonna cut it off and clamp the new one on. then if i need to go back to stock i'll just weld the old one back on.

thanks for the help

UdubBadger · 03-15-2008, 11:23 AM

jesus... ok so i was a bit timid last night in doing this whole thing. I went to Car-X this morning and they said it would cost me $180 for them to install it because they have to put all the new brackets on. Anyone else think thats a total ripoff?

might consider doing it myself again if there is a good DIY guide anyone knows of... I haven't seen any.

CampioniShop · 03-15-2008, 11:27 AM

You should have installation instructions with your order. It points exactly where to cut and how to mount the exhaust. It is 70mm from your rear exhaust. No manufacturing of brackets is necessary, the 3 of them are included, that's a total ripoff.

Andrew@ET · 03-16-2008, 11:18 PM

um.. i had a rear exhaust made and welded on with tips for um 110 lol so yeah rip! all you should need is a cut and 1 weld thats it....

60 max !

UdubBadger · 03-17-2008, 04:34 PM

so after about 3 hrs at a shop... i had to custom install this damn thing because the brackets i got didn't fit at all.
see below

Before:

SOUND CLIP OF STOCK MUFFLER

After:

SOUND CLIP OF REMUS POWER SOUND MUFFLER

ENJOY

ARA5HE90 · 03-17-2008, 06:03 PM

the clip doesnt work =(

im gonna post sound of my acs exhaust.. we shall see whats the difference lol

voltron1011 · 03-17-2008, 11:41 PM

Nice sound!!! The million-dollar question is, does it drone at 80 mph?

CampioniShop · 03-18-2008, 08:52 AM

Is this with the valve opened or closed? Sounds like opened!

alex2112 · 03-18-2008, 12:21 PM

Quote:

Originally Posted by voltron1011

Nice sound!!! The million-dollar question is, does it drone at 80 mph?

+1

I am toying with the idea of getting a muffler for my 328 but I am worried it will drone or be too loud.

snipersix · 02-08-2010, 07:53 PM

Quote:

Originally Posted by alex2112

+1

I am toying with the idea of getting a muffler for my 328 but I am worried it will drone or be too loud.

mine doesn't drone

Tim2189 · 02-08-2010, 11:40 PM

i was gonna go with a different muffler...once they got the car on the lift we took out the resonator.....then the secondary cats....so it ended up being a custom exhaust lol straight pipes from the cats to the new muffler i put in.....the sound is nice and deep which is what i wanted
They had to make 2 new brackets for me also

03-13-2008, 11:57 PM	#1
UdubBadger Banned 683 Rep 24,685 Posts Drives: '04 330i ZHP Join Date: Dec 2007 Location: Chicago Burbs iTrader: (22) Garage List 2004 BMW 330i ZHP [9.50] 2011 135i [7.46] 2008 328xi [8.76]	Remus muffler install for my 328 - Need HELP! Anyone know whats required for this? my car is leased and i'm doing mods that are only reversible, however plan to purchase my car at the end of the lease (assuming its not totally over priced). I have read on a few exhaust posts that you have to cut the OEM muffler off to install the after market ones. Any way around this or any suggestions on how to mod the Remus so its just the same as my OEM and can remove it at some connection point of the exhaust. (I don't really know what it looks like down there buy most of my other cars have had a bolt on point somewhere along the line). PLEASE HELP!
	Appreciate 0 Tweet Quote

03-14-2008, 12:17 AM	#2
Deadkookaburra Private 3 Rep 83 Posts Drives: 325i Join Date: Oct 2006 Location: 43615 iTrader: (0)	it should be a bolt on mod. no wielding or cutting required. that's the case for my sebring...however the low end of that exhaust was so bad that i gave it up
	Appreciate 0 Quote

03-14-2008, 01:35 AM	#3
UdubBadger Banned 683 Rep 24,685 Posts Drives: '04 330i ZHP Join Date: Dec 2007 Location: Chicago Burbs iTrader: (22) Garage List 2004 BMW 330i ZHP [9.50] 2011 135i [7.46] 2008 328xi [8.76]	lets hope cuz if not i might just...
	Appreciate 0 Quote

03-14-2008, 01:40 AM	#4
AH Major 26 Rep 1,165 Posts Drives: E90 320i Join Date: Nov 2006 Location: Indonesia iTrader: (0) Garage List 2006 E90 [0.00]	Bolt on for my 320i Remus. __________________ Mods: Remus, Blacklines, Hartge, ACS, Breyton, Eibach, 20" Lative
	Appreciate 0 Quote

03-14-2008, 04:39 PM	#5
voltron1011 Colonel 129 Rep 2,909 Posts Drives: 2011 135i, FJR-1300 Join Date: Apr 2005 Location: Wiesbaden iTrader: (2)	You can change it to a bolt on.. You'll just need to cut the original and weld a flange onto it, the new muffler, and the exhaust pipe itself. __________________ '06 E90 325i (Delivered May '05) 6-spd manual, Nav, Xenons, 18' 162's, sport-suspension, 15mm RE spacers, NURBURGRING: http://www.e90post.com/forums/album.php?albumid=3270
	Appreciate 0 Quote

03-15-2008, 11:23 AM	#7
UdubBadger Banned 683 Rep 24,685 Posts Drives: '04 330i ZHP Join Date: Dec 2007 Location: Chicago Burbs iTrader: (22) Garage List 2004 BMW 330i ZHP [9.50] 2011 135i [7.46] 2008 328xi [8.76]	jesus... ok so i was a bit timid last night in doing this whole thing. I went to Car-X this morning and they said it would cost me $180 for them to install it because they have to put all the new brackets on. Anyone else think thats a total ripoff? might consider doing it myself again if there is a good DIY guide anyone knows of... I haven't seen any.
	Appreciate 0 Quote

03-15-2008, 11:27 AM	#8
CampioniShop 34 Rep 791 Posts Drives: na Join Date: Aug 2007 Location: NY iTrader: (0)	You should have installation instructions with your order. It points exactly where to cut and how to mount the exhaust. It is 70mm from your rear exhaust. No manufacturing of brackets is necessary, the 3 of them are included, that's a total ripoff.
	Appreciate 0 Quote

03-16-2008, 11:18 PM	#9
Andrew@ET Brigadier General 200 Rep 4,037 Posts Drives: Red thing Join Date: May 2007 Location: Earth iTrader: (9)	um.. i had a rear exhaust made and welded on with tips for um 110 lol so yeah rip! all you should need is a cut and 1 weld thats it.... 60 max !
	Appreciate 0 Quote

03-17-2008, 04:34 PM	#10
UdubBadger Banned 683 Rep 24,685 Posts Drives: '04 330i ZHP Join Date: Dec 2007 Location: Chicago Burbs iTrader: (22) Garage List 2004 BMW 330i ZHP [9.50] 2011 135i [7.46] 2008 328xi [8.76]	FINALLY DONE *SOUND CLIPS OF 328 w/REMUS* so after about 3 hrs at a shop... i had to custom install this damn thing because the brackets i got didn't fit at all. see below Before: SOUND CLIP OF STOCK MUFFLER After: SOUND CLIP OF REMUS POWER SOUND MUFFLER ENJOY Attached Images Last edited by UdubBadger; 11-12-2009 at 03:33 PM..
	Appreciate 0 Quote

03-17-2008, 06:03 PM	#11
ARA5HE90 ARA5HE90 134 Rep 2,055 Posts Drives: a beast! Join Date: Nov 2007 Location: Toronto iTrader: (11) Garage List 2007 328XI [0.00]	the clip doesnt work =( im gonna post sound of my acs exhaust.. we shall see whats the difference lol __________________ 2oo7 e90 JB 328xi/// with too many mods!?!?! check out my ride = http://www.e90post.com/forums/showthread.php?t=246531 2oo8 e90 SSII ///M3 the silver ghost = http://www.m3post.com/forums/showthread.php?t=409084
	Appreciate 0 Quote

03-17-2008, 11:41 PM	#12
voltron1011 Colonel 129 Rep 2,909 Posts Drives: 2011 135i, FJR-1300 Join Date: Apr 2005 Location: Wiesbaden iTrader: (2)	Nice sound!!! The million-dollar question is, does it drone at 80 mph? __________________ '06 E90 325i (Delivered May '05) 6-spd manual, Nav, Xenons, 18' 162's, sport-suspension, 15mm RE spacers, NURBURGRING: http://www.e90post.com/forums/album.php?albumid=3270
	Appreciate 0 Quote

03-18-2008, 08:52 AM	#13
CampioniShop 34 Rep 791 Posts Drives: na Join Date: Aug 2007 Location: NY iTrader: (0)	Is this with the valve opened or closed? Sounds like opened!
	Appreciate 0 Quote

02-08-2010, 11:40 PM	#16
Tim2189 Russian in a Bimmer 601 Rep 5,618 Posts Drives: X5 M50i Join Date: Jul 2008 Location: Brooklyn NY iTrader: (3)	i was gonna go with a different muffler...once they got the car on the lift we took out the resonator.....then the secondary cats....so it ended up being a custom exhaust lol straight pipes from the cats to the new muffler i put in.....the sound is nice and deep which is what i wanted They had to make 2 new brackets for me also Attached Images __________________ 2013 X6 - retired 2015 X6 - retired 2015 435GC - retired 2018 X5 40e - retired 2020 X5 M50i - Current
	Appreciate 0 Quote