Methanol Kit

upss · 11-21-2012, 06:24 AM

Help A Good Methanol Kit Not To Expensive Thank?

Ænema · 11-21-2012, 07:37 AM

Aquamist is then way to go. The HFS-4 kit includes a tank. The HFS-3 kit does not, however a RCI fuel cell is very high quality and very reasonable as far as pricing goes.

Jeff@TopGearSolutions · 11-21-2012, 09:19 AM

What is your budget? You can get a basic coolingmist or devils own kit for about $300 but it won't have any failsafes. Will it work, yes, assuming you have a tune to take advantage of it. The downside is if something goes wrong you potentially can blow your motor, although rare. The stock DME is pretty smart at pulling ignition timing but in a worst case scenario it may not act fast enough.

Mike@N54Tuning.com · 11-21-2012, 10:37 AM

Quote:

Originally Posted by upss

Help A Good Methanol Kit Not To Expensive Thank?

Which tune are you running? Its good advice to use the meth kit your tuner recommends.

Mike

zztwinturbozz · 11-22-2012, 09:47 AM

What kit if any is recommended with a Cobb tune?

enrita · 11-22-2012, 09:55 AM

See post 2

jippii ensio · 11-22-2012, 10:56 AM

Have the one that works Plug&Play with your tune.

11-21-2012, 06:24 AM	#1
upss Private 5 Rep 62 Posts Drives: 335i 2008 Join Date: Apr 2011 Location: Puerto Rico iTrader: (0)	Methanol Kit Help A Good Methanol Kit Not To Expensive Thank?
	Appreciate 0 Tweet Quote

11-21-2012, 07:37 AM	#2
Ænema Captain 14 Rep 961 Posts Drives: BMW Join Date: Aug 2012 Location: Arizona Bay iTrader: (0)	Aquamist is then way to go. The HFS-4 kit includes a tank. The HFS-3 kit does not, however a RCI fuel cell is very high quality and very reasonable as far as pricing goes. __________________ "I'm not surprised you get along well with all the other neighbours. If you put fifty children with Down's syndrome in a room there is going to be a lot of hugging." David Thorne
	Appreciate 0 Quote

11-21-2012, 09:19 AM	#3
Jeff@TopGearSolutions 3483 Rep 79,210 Posts Drives: C6 Z06, 09 335i, 10 335xi Join Date: Dec 2008 Location: www.TopGearSolutions.com iTrader: (37)	What is your budget? You can get a basic coolingmist or devils own kit for about $300 but it won't have any failsafes. Will it work, yes, assuming you have a tune to take advantage of it. The downside is if something goes wrong you potentially can blow your motor, although rare. The stock DME is pretty smart at pulling ignition timing but in a worst case scenario it may not act fast enough.
	Appreciate 0 Quote

11-22-2012, 09:47 AM	#5
zztwinturbozz Private 0 Rep 74 Posts Drives: 335i xdrive Join Date: Jun 2012 Location: Denver iTrader: (1)	What kit if any is recommended with a Cobb tune?
	Appreciate 0 Quote

11-22-2012, 09:55 AM	#6
enrita Major General 167 Rep 7,377 Posts Drives: 335i - Big turbos Join Date: Sep 2008 Location: Italian in Sweden iTrader: (0)	See post 2 __________________ 07 335i AT - MOTIV 750 - MHD E85 BMS flash - BMS PI - JB4G5 - Okada Coils - NGK 5992 Plugs - Helix IC - Snow Stg. 3 - Stett CP - Custom midpipes with 100 HJS Cats - Bastuck Quad - PSS10 - QUAIFE LSD - BMS OCC - Forge DVs - AR OC - ALCON BBK - M3 Chassi - Dinan CP - Velocity M rear Toe arms - Advan RZ-DF - LUX H8 - Level 10 AT upgrade
	Appreciate 0 Quote

11-22-2012, 10:56 AM	#7
jippii ensio Major 72 Rep 1,432 Posts Drives: 335i Join Date: Feb 2009 Location: On the road iTrader: (0)	Have the one that works Plug&Play with your tune.
	Appreciate 0 Quote