|
|
|
|
 |
 
|
 |
BMW Garage | BMW Meets | Register | Search | Today's Posts | Mark Forums Read |
 |
|
BMW 3-Series (E90 E92) Forum
>
WTB: O2 Sensor
|
 |
| 09-08-2011, 10:56 AM | #1 |
|
Captain
 41
Rep 823
Posts |
WTB: O2 Sensor
Need one for the front DP (longer DP closer to the side of the car) rear sensor..
Original sensor threads were stripped... Didn't find out until I replaced my DPs... |
| 09-08-2011, 11:02 AM | #2 | |
|
Colonel
 
149
Rep 2,934
Posts |
Quote:
You might want to try fixing the threads first as long as theyre not too bad. I'm sure you can buy a dye with the right size and pitch to fix it. If it works it should be a pretty cheap fix: http://www.amazon.com/18mm-Carbon-St.../dp/B0007CNJ2C
__________________
 |
|
|
Appreciate
0
|
| 09-08-2011, 11:08 AM | #3 |
|
Captain
41
Rep 823
Posts |
Someone recommended this to me earlier. I have no experience doing so and I know its not the easiest thing to just go ahead and do... I contacted a local machine shop to see if they can fix her up for me real quickly.. Ideally that works, but I certainly don't want to risk ruining my AR DP bung.
|
|
Appreciate
0
|
| 09-08-2011, 12:42 PM | #4 |
|
Captain
41
Rep 823
Posts |
I should restate that.. Its not the difficulty its the fact that I haven't done it before and could mess up ... if they actually charge me at the shop I'd rather pay that as insurance and they would be able to tell me upfront if it seems fixable.
|
|
Appreciate
0
|
 |
| Bookmarks |
| Thread Tools | Search this Thread |
|
|
