NEED HELP!

Project M4 · 10-20-2011, 07:57 PM

so i got a 08 335xi coupe on H&R sport springs with a set of 19x9.5 wheels in the rear with 275 30 19 tires on them. soon as i left the tire i was rubbing pretty bad (i also had all 4 of my stock wheels in the car as well). i got the fenders rolled by CNC which did a great job by the way but i rub still especially if i have someone in the car. any advice??

lpphreakx06 · 10-20-2011, 08:02 PM

What is the offset of the rear wheels?

Project M4 · 10-20-2011, 08:29 PM

um the wheels are 19x9.5 et 35? i think

Project M4 · 10-20-2011, 09:35 PM

i guess i could roll it more

N0OS3 · 10-20-2011, 09:38 PM

strange that you scrub with such an average tire size. i have 20" with 225/30R20's on my wheels + 20mm (0.85") spacers and get no scrub at all... equivalent to just about 9.5" wheel offset

try buying some camber plates for the rear and go -1° or -1.5° ... this will allow the upper portion of the rim to go inwards toward the car.

the low setting of the camber may not affect tire wear too bad, but it will wear them down faster none-the-less. Expect to get the rear wheels rotated around 5k miles.

10-20-2011, 07:57 PM	#1
Project M4 Second Lieutenant 17 Rep 209 Posts Drives: AW M4 Join Date: May 2011 Location: San Diego CA iTrader: (3)	NEED HELP! so i got a 08 335xi coupe on H&R sport springs with a set of 19x9.5 wheels in the rear with 275 30 19 tires on them. soon as i left the tire i was rubbing pretty bad (i also had all 4 of my stock wheels in the car as well). i got the fenders rolled by CNC which did a great job by the way but i rub still especially if i have someone in the car. any advice??
	Appreciate 0 Tweet Quote

10-20-2011, 08:02 PM	#2
lpphreakx06 Professional Moose Racer 331 Rep 7,509 Posts Drives: SG 335i E92 RIP + 2015 SS M3 Join Date: Jul 2008 Location: Bellevue, Wa iTrader: (25)	What is the offset of the rear wheels? __________________ Visit my blog anytime: http://www.sfpayments.com BMW Dream Team PNW Chapter, member #1 \|HP Autowerks \| AR DESIGN \| BMW PERFORMANCE \| STOP TECH \| Volk Racing\| AMS \| ARKYM
	Appreciate 0 Quote

10-20-2011, 08:29 PM	#3
Project M4 Second Lieutenant 17 Rep 209 Posts Drives: AW M4 Join Date: May 2011 Location: San Diego CA iTrader: (3)	um the wheels are 19x9.5 et 35? i think
	Appreciate 0 Quote

10-20-2011, 09:35 PM	#4
Project M4 Second Lieutenant 17 Rep 209 Posts Drives: AW M4 Join Date: May 2011 Location: San Diego CA iTrader: (3)	i guess i could roll it more
	Appreciate 0 Quote

10-20-2011, 09:38 PM	#5
N0OS3 Colonel 150 Rep 2,217 Posts Drives: E90 Join Date: Feb 2010 Location: Oak Harbor, WA iTrader: (5)	strange that you scrub with such an average tire size. i have 20" with 225/30R20's on my wheels + 20mm (0.85") spacers and get no scrub at all... equivalent to just about 9.5" wheel offset try buying some camber plates for the rear and go -1° or -1.5° ... this will allow the upper portion of the rim to go inwards toward the car. the low setting of the camber may not affect tire wear too bad, but it will wear them down faster none-the-less. Expect to get the rear wheels rotated around 5k miles.
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search