Arkym Front Lip

335_MI6 · 11-15-2011, 07:30 PM

So i was driving down to miami on 95, and i start feeling this pull i first thought i cracked my wheels or something. So i pull over to the side of the highway walk around the car and looked around and it looked fine so i headed for the front of the car and i see that my arkym front lip is hanging, that is point im fliping two s**ts so thankfully i had painters tape in the trunk so i painters tapes my whole front end so i could make it to the next exit. After i make it to the next exit, i park my car in front of a shopping plaza and im trying to take off the lip with my bare hands. Finally I took it off, i will attach pictures.

Long story short, whats the best way of putting the Arkym Front Lip on? I tried 3m taping it to the addition of the 6 screws? Any ideas? Something that can hold atleast 100mph, i wasnt going that fast when my lip fell i was going around 75pmh when it fell

JDLM · 11-15-2011, 07:35 PM

Did you use adhesion promoter?

335_MI6 · 11-15-2011, 08:17 PM

Quote:

Originally Posted by JDLM

Did you use adhesion promoter?

Yeah i did, luis at oss told me to use 3M Auto Glass Urethane Windshield Adhesive next time. I might just do that

edirtaynine · 11-15-2011, 08:46 PM

so u used 3m tape and screws and it still fell off?? i have 10 screws and tape holding mine up perfectly fine. did the screws u used even the right head size? from that one pic (the ginormous one) it looks like the hole is untouched. did the screw just fall off from the bumper?

Mr_PharmD · 11-15-2011, 11:40 PM

I went over 100 on mine and it's holding up just fine (knock on wood, hehe) and I used 3m auto tape and the 10 screws also.

I'm surprise if it fell off that it didn't break in half or at least crack some portion of it.

U should zoom out and show us pix where u applied the tape bc that pix doesn't help.

335_MI6 · 11-16-2011, 09:43 AM

Quote:

Originally Posted by Mr_PharmD

I went over 100 on mine and it's holding up just fine (knock on wood, hehe) and I used 3m auto tape and the 10 screws also.

I'm surprise if it fell off that it didn't break in half or at least crack some portion of it.

U should zoom out and show us pix where u applied the tape bc that pix doesn't help.

Updated the first post

11-15-2011, 07:30 PM	#1
335_MI6 Colonel 125 Rep 2,486 Posts Drives: 335xi Join Date: May 2011 Location: DC/MIAMI/LONDON iTrader: (4)	Arkym Front Lip So i was driving down to miami on 95, and i start feeling this pull i first thought i cracked my wheels or something. So i pull over to the side of the highway walk around the car and looked around and it looked fine so i headed for the front of the car and i see that my arkym front lip is hanging, that is point im fliping two s*ts so thankfully i had painters tape in the trunk so i painters tapes my whole front end so i could make it to the next exit. After i make it to the next exit, i park my car in front of a shopping plaza and im trying to take off the lip with my bare hands. Finally I took it off, i will attach pictures. Long story short, whats the best way of putting the Arkym Front Lip on? I tried 3m taping it to the addition of the 6 screws? Any ideas? Something that can hold atleast 100mph, i wasnt going that fast when my lip fell i was going around 75pmh when it fell Attached Images Last edited by 335_MI6; 11-16-2011 at 09:42 AM..*
	Appreciate 0 Tweet Quote

11-15-2011, 07:35 PM	#2
JDLM Banned 73 Rep 3,276 Posts Drives: 2009 335i Sedan Join Date: Aug 2008 Location: Kansas iTrader: (4)	Did you use adhesion promoter?
	Appreciate 0 Quote

11-15-2011, 08:46 PM	#4
edirtaynine Major General 84 Rep 6,088 Posts Drives: e92 Join Date: Mar 2011 Location: SoCal iTrader: (0)	so u used 3m tape and screws and it still fell off?? i have 10 screws and tape holding mine up perfectly fine. did the screws u used even the right head size? from that one pic (the ginormous one) it looks like the hole is untouched. did the screw just fall off from the bumper?
	Appreciate 0 Quote

11-15-2011, 11:40 PM	#5
Mr_PharmD Major 45 Rep 1,030 Posts Drives: 335i coupe Join Date: Mar 2011 Location: Fresno iTrader: (19)	I went over 100 on mine and it's holding up just fine (knock on wood, hehe) and I used 3m auto tape and the 10 screws also. I'm surprise if it fell off that it didn't break in half or at least crack some portion of it. U should zoom out and show us pix where u applied the tape bc that pix doesn't help.
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search