removing trim for wrapping

PeteJonesN54 · 04-28-2012, 07:59 PM

having a little trouble removing the harness to the center ac vents and the trim around the shifter nd ashtray. diy link or suggestions

Cuba · 04-28-2012, 10:26 PM

http://www.e90post.com/forums/showthread.php?t=137527

see if this helps

psnt1ol · 04-29-2012, 12:25 PM

Quote:

Originally Posted by PeteJonesN54

having a little trouble removing the harness to the center ac vents and the trim around the shifter nd ashtray. diy link or suggestions

This is not the hardest part. Connecting the pin afterwards, is worse. To avoid all this, I pop out the vent instead while leaving the pins in the connector. There are about 6 taps that hold the vent to the trim. You could pry them loose with a screw driver. It takes a little time and patience but it is so much easier than trying to connect the pins with a needle nose in a space that is about the size of a quarter.

04-28-2012, 07:59 PM	#1
PeteJonesN54 Enlisted Member 0 Rep 47 Posts Drives: 08 335i 4dr Join Date: Mar 2012 Location: Houston iTrader: (0)	removing trim for wrapping having a little trouble removing the harness to the center ac vents and the trim around the shifter nd ashtray. diy link or suggestions
	Appreciate 0 Tweet Quote

04-28-2012, 10:26 PM	#2
Cuba Cuba 88 Rep 1,676 Posts Drives: 07 328xi Join Date: Jul 2010 Location: PA iTrader: (12)	http://www.e90post.com/forums/showthread.php?t=137527 see if this helps __________________ 07 328xi Monaco Blue\|Premium\|Cold\|Navi\|CA\|LLumar\|Mtec\|DDM\|aFe\|Ambe r-Gone\|Rear Fogs\|Bimmian\|PY-Speed\|OEM\|e92-lighting\|V1\|BavAuto\|Weisslicht\|Cyba\|Beyern\|Falken\| Sonic Tuning\|ECS Tuning\|JL Audio\|Rockford Fosgate
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search