[IM2C]

Let me preface by saying that I did quite a bit of research.
My car has light/moderate swirls from washing.
I have PC 7424 and have been using Klasse AIO for years. Time to step it up a notch.

Here's my plan:

1. CG citrus gun soak

2. 2 bucket wash/shipskin mit

3. Clay

4. Here's my dilema:
a. Mag 105/orange pad or
b. Mag D300/MF cutting pad

5.Meg 205/white pad

6. Menz PO85RD/black pad

7. Blackfire Wet Diamond Sealant/blue pad

Please chime in. Thanks.

P.S. Please DON'T completely re-write my plan with zaino etc...I'm confused as it is.

[Krells]

I would clay before you polish. You can't go wrong with either m105 of d300. I think m105 on orange will be more than enough to remove defects on jet black.

[IM2C]

Originally Posted by Krells

I would clay before you polish. You can't go wrong with either m105 of d300. I think m105 on orange will be more than enough to remove defects on jet black.

Fixed. Thanks.

[mvillezcas]

I find d300 with microfiber cutting pads works better than M105 w/ orange pad.

[cu2mike]

After D300 with MF pads, try M205 with red pads.