[TT3 iN NyC]

Apologies in advance for the noob question.

Below is a screen shot of my user settings. I'm running stage 3 aggressive. the only adjustment I've made was lower the max boost to 15psi due to the heat in NYC.

Is the settings below a bit too conservative? I don't feel as if the car pulls hard compared to another PROcede car I've been in. Both are 6AT's.

Is there any changes I can make to the car seem more stronger?

[TT3 iN NyC]

Anyone? =)

[syd]

If i remember correctly map 3 is with the turbos completley off. its in N/A mode

Map - Is the stock map.
Map 1 - is an great map to run when casually driving. You get great pull
Map 2 - I feel is the same as map 1, but I guess you get a little more power since its aggressive
Map 3- is there N/A mode (I think)

From what Garrett told me, with v5 you should be running in map 1-2.

or I am an idiot and am misunderstanding what i read -_- and just tried to look intuitive lol

[TT3 iN NyC]

^^^ lmao.

All good. I drive only in map 1.

[Wedge1967]

Yeah I agree with your last sentence but due to the really hot pic, I can forgive your ignorance. My apologies if you take this the wrong way, but it takes time to figure this stuff out. I'm not saying I'm a pro, I still need advice once in awhile. But do everyone a favor and try not to post if you don't know what you're talking about.

PM sent to OP

Originally Posted by syd

If i remember correctly map 3 is with the turbos completley off. its in N/A mode

Map - Is the stock map.
Map 1 - is an great map to run when casually driving. You get great pull
Map 2 - I feel is the same as map 1, but I guess you get a little more power since its aggressive
Map 3- is there N/A mode (I think)

From what Garrett told me, with v5 you should be running in map 1-2.

or I am an idiot and am misunderstanding what i read -_- and just tried to look intuitive lol

[TT3 iN NyC]

Spoke to Wedge on the phone.

Thank you bro, I really appreciate your input/thoughts

[TurboBimmer]

Originally Posted by TT3 iN NyC

Spoke to Wedge on the phone.

Thank you bro, I really appreciate your input/thoughts

Mind sharing them?

[guru_method]

Shiv mentioned that in Stg 3 aggressive Map 1 or 2 are exactly the same unless you change something yourself.

I live in PR and the heat is incredible, I use map 2 in stock settings and get peak boost of 17-17.3 psi. Car feels good but I don't know if I got used to to it because it feels pretty slow now , I would like to know how to spice things up a bit as well.

[TT3 iN NyC]

Same issue, I'm not peeking at 17, my peek is lower. I sent Robert my data log. Awaiting his response.

[Wedge1967]

We found the throttle was only opening 80% according to his logs. Hopefully that will help.

[TT3 iN NyC]

Originally Posted by Wedge1967

We found the throttle was only opening 80% according to his logs. Hopefully that will help.

Yup.

Very strange. Why would it open only 80% though? I'm still a bit confused. I'm going to try re-uploading firmware and 5-23 maps. Hopefully that helps.

[guru_method]

Do the throttle calibration and see if it reads the full 100

[TT3 iN NyC]

Originally Posted by guru_method

Do the throttle calibration and see if it reads the full 100

Yup I re-uploaded maps and did the calibration.

It reads to 100% now.

Thanks!

[AU335i]

Originally Posted by guru_method

Shiv mentioned that in Stg 3 aggressive Map 1 or 2 are exactly the same unless you change something yourself.

I live in PR and the heat is incredible, I use map 2 in stock settings and get peak boost of 17-17.3 psi. Car feels good but I don't know if I got used to to it because it feels pretty slow now , I would like to know how to spice things up a bit as well.

I still think Map 2 feels different than Map 1


and I usually only peak at around 16 psi with Map 1 Stg 3 Aggressive