[johnniewalker]

When doing the installation behind the coil spring,
There is a step that says:

Disconnect all cables from plug X10170 and connect
to branch A7 as follows
- BR cable from PIN 1 to PIN 1
- BR/GE cable from PIN 2 to PIN 2
- GE/BR cable from PIN 3 to PIN 3
- GE/SW cable from PIN 4 to PIN 4
- GR/BR cable from PIN 5 to PIN 5
- GR/SW cable from PIN 6 to PIN 6

My X10170 plug is a 12 pin socket, it has the 6 cables above and another 4 cables at pin 7, 9, 10 and 12.

The steering wheel came with branch A7 (which is a 12 pin socket identical to X10170) and pins 7, 10 and 12 are occupied.

So my question is:
After I transfer pin 1,2,3,4,5 and 6 from X10170 to A7
and A7 already has 3 cables each at pin 7, 10 and 12.

What do I do with the 4 cables that were originally at pin 7,9,10 and 12 from X10170 ?
Only the one at pin 9 can be transferred since it is not occupied.