Help me out plz anyone

patman95 · 12-23-2012, 04:06 PM

Ok I have had enough of replacing injectors. I'm blowing out so many injectors with my jb4. Every time I put it on and step on it I get a misfire an it's the injector. These oem BMW injectors suck

ihc95 · 12-23-2012, 05:07 PM

have you had them coded properly?

Richurd · 12-23-2012, 07:40 PM

I would have to say no.

cn555ic · 12-23-2012, 08:13 PM

Quote:

Originally Posted by patman95

Ok I have had enough of replacing injectors. I'm blowing out so many injectors with my jb4. Every time I put it on and step on it I get a misfire an it's the injector. These oem BMW injectors suck

Next time you replace the injector get the numbers from the actual injector

There will be a total of 6 numbers on it...Write them down and make sure you know which injector it is that you changed for the cylinder...Once you do it, hit me up and I will code it in for you...

JETBLK335i · 12-23-2012, 08:23 PM

Hello. Newbie on this topic here. How does coding injectors work? Does it mean once they are coded that if a misfire happens the read code will determine if the injector is bad?

Leekay07 · 12-23-2012, 09:42 PM

the new injector has to be coded to the DME not sure what tool you would need to do this yourself.

Also are you sure its an injector issue? Causing the misfire?

JETBLK335i · 12-23-2012, 10:07 PM

Quote:

Originally Posted by Leekay07

the new injector has to be coded to the DME not sure what tool you would need to do this yourself.

Also are you sure its an injector issue? Causing the misfire?

Good point to the OP. have you tried replacing all 6 spark plugs?

psmitty95 · 12-23-2012, 11:26 PM

Quote:

Originally Posted by JETBLK335i

Hello. Newbie on this topic here. How does coding injectors work? Does it mean once they are coded that if a misfire happens the read code will determine if the injector is bad?

No the coding are two numbers on the injectors. I can't remember off the top of my head but I think one of them is a flow number. It's basically cause every injector will be different so even if it's a very small number coding gets it perfect. I don't think having a non-coded injector could cause them to continuously misfire though... There are some people on here who never code their injectors and are having no problems.

Edit: It looks like the bottom number is the flow calibration number but idk what the top is...

http://www.n54tech.com/forums/showthread.php?t=15140

Szemenyei · 12-23-2012, 11:53 PM

Depending where you are located I could code the injectors for you if you get the needed numbers. I have coded a few people's on the forum.

12-23-2012, 04:06 PM	#1
patman95 New Member 8 Rep 26 Posts Drives: 2008 BMW 335xi Join Date: Dec 2011 Location: United States iTrader: (0)	Help me out plz anyone Ok I have had enough of replacing injectors. I'm blowing out so many injectors with my jb4. Every time I put it on and step on it I get a misfire an it's the injector. These oem BMW injectors suck
	Appreciate 0 Tweet Quote

12-23-2012, 05:07 PM	#2
ihc95 Major 149 Rep 1,316 Posts Drives: 2021 X3 M40i, 2018 Mustang GT Join Date: Jul 2011 Location: NJ iTrader: (1) Garage List 2007 BMW 335i Coupe [0.00]	have you had them coded properly?
	Appreciate 0 Quote

12-23-2012, 07:40 PM	#3
Richurd Captain 17 Rep 639 Posts Drives: Too slow. Join Date: Jul 2009 Location: nyc iTrader: (6)	I would have to say no. __________________ 07 e92 335i \| BSM \| SB \| Gray Poplar Wood Trim \| 6MT \| Premium \| Sport \| Cold Weather \| iDrive \| Logic7 \| Comfort Access \|
	Appreciate 0 Quote

12-23-2012, 08:23 PM	#5
JETBLK335i Lieutenant 27 Rep 437 Posts Drives: 2008 335i Join Date: Nov 2010 Location: Greenwich, CT iTrader: (3)	Hello. Newbie on this topic here. How does coding injectors work? Does it mean once they are coded that if a misfire happens the read code will determine if the injector is bad?
	Appreciate 0 Quote

12-23-2012, 09:42 PM	#6
Leekay07 Private First Class 5 Rep 104 Posts Drives: 08 335XI Sedan Join Date: Sep 2012 Location: NY iTrader: (0)	the new injector has to be coded to the DME not sure what tool you would need to do this yourself. Also are you sure its an injector issue? Causing the misfire?
	Appreciate 0 Quote

12-23-2012, 11:53 PM	#9
Szemenyei First Lieutenant 7 Rep 327 Posts Drives: Jet Black 335xi Join Date: Nov 2010 Location: Long Island, NY iTrader: (1)	Depending where you are located I could code the injectors for you if you get the needed numbers. I have coded a few people's on the forum. __________________ Current: 2018 F80 M3 Retired: 2013 B8.5 S4 Retired: 2007 e90 335xi Cobb Tuned e85 50/50, AFE Intake, VK Catless Downpipes, Spec Stage 3+ SMFW, ER CP w/ TIAL, Vanguard Exhaust (Custom Fit )
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search