|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Search | Today's Posts | Mark Forums Read |
|
BMW 3-Series (E90 E92) Forum
>
E92xi 219m Fitment Issues
|
|
12-11-2012, 11:16 AM | #1 |
Private First Class
6
Rep 184
Posts |
E92xi 219m Fitment Issues
I'm currently running 219m on a pre-lci E92 with 245/40/18 and 265/40/18 (18x8.5 and 18.9.5) Fenders have been rolled and cambers have been pulled in.
I've been told 225/40/18 and 255/35/18 or 235/40/18 and 265/35/18 Which way is the best route to go that will not cause my DSC errors to come up while driving? I occasionally rub when driving myself, and rub hard when car has 3 passengers. Also, which set up is best if I change my cambers back to normal? |
12-12-2012, 07:29 PM | #2 |
Private
24
Rep 86
Posts |
are you on stock suspension?
if you are rubbing then go with with 225/40 and 255/35s since they are not as wide as 235 or 265... where are you rubbing? inside or at the outside of tires? A 255 depending on tire brand is a baby stretch for 9.5 inch rim. |
Appreciate
0
|
01-02-2013, 03:33 PM | #6 |
Major
48
Rep 1,010
Posts |
235/40/18 and 265/35/18 should fit no problem, if you're worried about the fitment you can run the 225/255 combo
__________________
2008 335xi Jet Black//Coral Red VTT Stage 1+// Procede V5//VRSF DPs//AMS FMIC//KW V1//M3 Sways & Sub Bushings// Alpina AT flash Apex EC-7//Michelin PSS//Dinan CAI |
Appreciate
0
|
01-05-2013, 09:01 PM | #8 |
Enlisted Member
1
Rep 32
Posts |
|
Appreciate
0
|
Bookmarks |
Thread Tools | Search this Thread |
|
|