Had indy change oil. Dealer says oil bolt over torqued and leaking. I am confused.

Martin528 · 01-03-2013, 05:51 PM

Dealer said oil bolt over torqued and because so it was leaking. Would this not have caused damage to the oil pan if this were true?

raceyBMW · 01-03-2013, 06:02 PM

Not necessarily. The oil drain pan bolt gets a copper washer that can fail if tightened too much...its made to fail first so that you don't damage the pan. It probably cracked the washer and is leaking because of it. Heck maybe they reused the washer and it leaked because of that.

Could be a cracked pan if tightened WAY too much, but try replacing washer (which always comes with the oil filter kits) and re-torquing bolt first.

FormerRotor · 01-03-2013, 06:41 PM

Quote:

Originally Posted by raceyBMW

Not necessarily. The oil drain pan bolt gets a copper washer that can fail if tightened too much...its made to fail first so that you don't damage the pan. It probably cracked the washer and is leaking because of it. Heck maybe they reused the washer and it leaked because of that.

Could be a cracked pan if tightened WAY too much, but try replacing washer (which always comes with the oil filter kits) and re-torquing bolt first.

+1. It's a crush washer and hound be replaced any time the. Bolt is removed. They may not have replaced it or may have over torqued it. Either way, start there. If you're fast & messy, it's a cheap fix (washer plus 1Q). If not, it's just the cost of the washer + oil charge, no biggie.

Martin528 · 01-03-2013, 06:50 PM

dealer said that I was due an oil change and changed it again.That is how they discoverd it. It was not by mileage or time. But heck they did it for free.
I think I am going to get an oil cock valve so I can do it myself easily.

jwalker87 · 01-03-2013, 07:15 PM

The only problem with those oil cock valves is they are SLOW. I had one in another car, and removed it for a magnetic drain plug so I wouldn't have to wait 30 min for the oil to drain.

Efthreeoh · 01-04-2013, 06:46 AM

What is so hard about using a drain plug? Torque it down until it is snug and add a slight tap on the ratchet handle with the side of your fist and you are good to go.

07lilredwagon · 01-20-2013, 10:10 PM

Quote:

Originally Posted by Efthreeoh

What is so hard about using a drain plug? Torque it down until it is snug and add a slight tap on the ratchet handle with the side of your fist and you are good to go.

what he said.....

JP

01-03-2013, 05:51 PM	#1
Martin528 Second Lieutenant 15 Rep 263 Posts Drives: 2012 528 Join Date: Jun 2012 Location: Gulf Coast iTrader: (1)	Had indy change oil. Dealer says oil bolt over torqued and leaking. I am confused. Dealer said oil bolt over torqued and because so it was leaking. Would this not have caused damage to the oil pan if this were true? __________________ 2012 Tasman green metallic with oyster/ black interior. premium pkg, power tailgate, homelink, and park distance control. Premium sound: premium hi fi system and satellite radio,technology package: Rear view camera and navigation,Comfort Access,heated front seats, BMW apps
	Appreciate 0 Tweet Quote

01-03-2013, 06:02 PM	#2
raceyBMW king of the hills 114 Rep 2,923 Posts Drives: 2011 M3 w/ESS55, 2001 540i/6 Join Date: Dec 2006 Location: Arvada, CO iTrader: (1) Garage List 2001 BMW 540i/6 [8.17] 1994 530i [9.00] 2007 335i Coupe [8.37]	Not necessarily. The oil drain pan bolt gets a copper washer that can fail if tightened too much...its made to fail first so that you don't damage the pan. It probably cracked the washer and is leaking because of it. Heck maybe they reused the washer and it leaked because of that. Could be a cracked pan if tightened WAY too much, but try replacing washer (which always comes with the oil filter kits) and re-torquing bolt first.
	Appreciate 0 Quote

01-03-2013, 06:50 PM	#4
Martin528 Second Lieutenant 15 Rep 263 Posts Drives: 2012 528 Join Date: Jun 2012 Location: Gulf Coast iTrader: (1)	dealer said that I was due an oil change and changed it again.That is how they discoverd it. It was not by mileage or time. But heck they did it for free. I think I am going to get an oil cock valve so I can do it myself easily. __________________ 2012 Tasman green metallic with oyster/ black interior. premium pkg, power tailgate, homelink, and park distance control. Premium sound: premium hi fi system and satellite radio,technology package: Rear view camera and navigation,Comfort Access,heated front seats, BMW apps
	Appreciate 0 Quote

01-03-2013, 07:15 PM	#5
jwalker87 Major 336 Rep 1,034 Posts Drives: '08 335i, '11 335xi, '01 Z3M Join Date: Jul 2010 Location: Pittsburgh, PA iTrader: (2)	The only problem with those oil cock valves is they are SLOW. I had one in another car, and removed it for a magnetic drain plug so I wouldn't have to wait 30 min for the oil to drain.
	Appreciate 0 Quote

01-04-2013, 06:46 AM	#6
Efthreeoh General 19912 Rep 19,255 Posts Drives: The E90 + Z4 Coupe & Z3 R'ster Join Date: May 2012 Location: Verginny iTrader: (0)	What is so hard about using a drain plug? Torque it down until it is snug and add a slight tap on the ratchet handle with the side of your fist and you are good to go.
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search