[abhishriv]

found this stain in my paint on the hood of my car and i cant figure out what it is or how to get it out.. i tried clay bar, degreaser, iron-X, rubbing alcohol, even a slight bit of betalink remover. any idea what it could be or more importantly how to get it out?!

[WingZeroX5]

it's a birthmark! hehe jk

[Kramzz335i]

if you dont want to go as far as wet sanding, use an aggressive cutting pad on an orbital buffer along with an aggressive cutting compound, then polish out and wax.

[abhishriv]

Originally Posted by Bmwe90sg

don't use degreaser. not good for paint. well the stain is definatley in the clear coat. so i would say wet sand a little followed by polish to get it out.

ill try polishing before wet sanding it

Originally Posted by Kramzz335i

if you dont want to go as far as wet sanding, use an aggressive cutting pad on an orbital buffer along with an aggressive cutting compound, then polish out and wax.

thanks ill try that and see if it works, if not i may have to bust out the sand paper

[ScheerSpeed]

Try some Swissvax Cleaner Fluid Medium by hand first, if that doesn't work you may have to use the Cleaner Fluid Strong. both can also be used with a machine.

[SHEEDI]

Looks like your car was eating some curry

[will bleich]

if its tree sap, use kerosene

[Detailed Image]

It sounds like you did a good job cleaning the surface and it's not something on top of the clear coat. I would suggest starting with a light polish like the Meguiar's M205 and if that doesn't work try something more aggressive like the Meguiar's M105. I'm confident this will remove the marks safely and permanently. Good luck!

Greg @ DI