![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
BMW Garage | BMW Meets | Register | Search | Today's Posts | Mark Forums Read |
![]() |
![]() ![]() |
BMW 3-Series (E90 E92) Forum
>
data logging with Cobb on the track
![]() |
![]() |
04-08-2013, 09:56 AM | #1 |
First Lieutenant
![]() ![]() ![]() 40
Rep 386
Posts |
data logging with Cobb on the track
Now that I've got a Cobb AP, I took the opportunity to run some logs during an autocross yesterday. I used DashWare to overlay a few of the parameters onto my video (Accel Ped. Pos, RPM, Oil Temp, Boost, Gear). I was running the Stage 1 Sport LT map, and I was a little surprised to see boost going over 16 psi.
With all the available monitors on the Cobb, I'm wondering which ones you guys use for track days and what data you consider the most critical? Other than the ones I used here, I was thinking ECT, Charge Air Temp, and maybe load requested/actual load.
__________________
'07 E92 BMW 335i
![]() |
04-13-2013, 01:19 AM | #2 |
Leeeroy Jankins
![]() 32
Rep 423
Posts |
That overlay is neat. Good job
__________________
e90 LCI w/ -= VRSF 7" FMIC =-
-= Cobb: Stg1 +FMIC Aggressive ST =- Last Install: BMS DCI + Caliper/Drum Paint ![]() "If you're not 1st, you're last" -Ricky Bobby |
Appreciate
0
|
![]() |
Bookmarks |
Thread Tools | Search this Thread |
|
|