[WOT Bimmer]

I'm looking for a 3 stage intake manifold at a really good price for a 330. I think it might also be able to come off of a X5 or Z.

PM me with what you have.

[E90X]

Check http://car-part.com/ Found mine for $205 shipped with both DISA's still attached. If you're patient you can find one for cheap!

[basilakis]

@E90X: When you did the conversion did you have any problem with the stock engine maps? does it run fine?

[E90X]

I actually haven't had time to do the swap yet. Still sitting in a box in my house. From what I hear it runs fine without a retune, but to get all the potential out of it you'll need a tune. I plan to get a Eurocharged tune since they have remote tuners available here in chicago as well as "free lifetime tunes".

[basilakis]

Eurocharged stock tune? who offers that? i have seen many aftermarket but not really keen on doing that

[WOT Bimmer]

Originally Posted by E90X

I actually haven't had time to do the swap yet. Still sitting in a box in my house. From what I hear it runs fine without a retune, but to get all the potential out of it you'll need a tune. I plan to get a Eurocharged tune since they have remote tuners available here in chicago as well as "free lifetime tunes".

How much is that tune? Do you have a link to any dynos? I'm curious how much power they claim.

[SE3P_to_E90]

i thought you needed to get a 330i ecu to make this retrofit work... and those 330i ecu's are almost impossible to find since they were only available on 2006 models?

[WOT Bimmer]

Originally Posted by SE3P_to_E90

i thought you needed to get a 330i ecu to make this retrofit work... and those 330i ecu's are almost impossible to find since they were only available on 2006 models?

I don't think so.

[SE3P_to_E90]

It makes sense... if you can get your ecu re-mapped, i'm sure you can get those 330i intake manifolds to work... there's a lot of literature on this, and a lot of attempts. however, not many people were successful at it. haven't looked into this in a few years :/