M3 rear lower camber link conversion kit for all E82/E9x 1 and 3 series

HP Autosport · 03-31-2009, 12:58 AM

One of the last two remaining rear-end pieces to complete your E9X M3 suspension conversion. The other being the rear toe link, which is still under developement, but will be available soon.

This R&D process took several weeks to complete, but it is finally done and is available for ALL E82/E9X 1 and 3 series owners. Rear E9X M3 light weight alloy lower camber links will replace the heavy 135i and 335i steel counter parts. The M3 camber link is a good 2 lbs!!! lighter per unit and is much stronger in design with less flex. The dampers will be better positioned to have a quicker reaction time to bumps and no longer be in the soft and flexible 135i/335i rubber saddles. Height adjuster, coil-over style spring with spring thrust sheets will be used. although not required, but highly recommended. We offer spring rates from 400 in/lb all the way to over 1000 in/lbs(Any spring rates over 800lbs will require a custom rear damper). Dampers can be Koni single or double adjustable units valved properly to handle most of the spring rates we toss at them. AST and KW will soon be available as well.

See the full R&D write-up here:

http://www.e90post.com/forums/showthread.php?t=227480

All mounting hardware is included with the proper headlight verticle aim bracket.

Benefits:
-Light weight aluminum
-Stronger then the 335i links by design
-Less flex
-Better rear damper mounting for faster damper reaction time

If you already have Koni dampers, you can choose to replace the rear dampers only in either single or double adjustable variety. If you are on KW(May be an option at a later date), Bilstein, Tein, etc. It is our recommendation to convert to either Koni or AST at this time.

Alternatively, if you need a complete coil-over set-up, we offer AST and Koni single or double adjustable coil-over kits.

Choose our custom Swift springs for the ultimate in handling for your BMW. Swift's R & D team created material, called H5S.TW, which is stronger then regular silicone chrome material. Because of this material, they could make the spring wire thinner, and could wind the springs with fewer coils, which greatly decreased weight while dramatically increasing available stroke.

Benefits:
-Lighter Unsprung Mass
-Smoother Weight Transfer
-Better Ride Quality
-Lower Tire Temperature
-Increased ability to anticipate vehicle reaction

Price at $555.15

Orders may be placed here:

http://www.hpashop.com/product.sc?ca...3&productId=74

HP Autosport · 04-07-2009, 02:15 AM

The AST and Koni coil-overs can be had in Single Adjust, Double Adjust or Triple Adjust(AST only).

Just about any spring rates of your choice or we can recommend one for the type of driving you do.

HP Autosport · 05-08-2009, 01:05 PM

Full AST and TCKline Coilvers can be shipped along with the M3 rear lower camber link conversion kits.

HP Autosport · 05-26-2009, 07:51 PM

KW coilover system with Swift springs are possible now. Serious inquiries only please.

HP Autosport · 07-22-2009, 12:53 PM

Lower camber link conversion kits are in stock and ready to ship!

enigmaticdream · 07-23-2009, 06:10 PM

That's pretty damn cool. I wouldn't mind getting some of those hehe.

s2kdagjd · 07-24-2009, 02:24 PM

so i cant use my kw1's on this?

lpphreakx06 · 07-24-2009, 02:27 PM

^Nope.

HP Autosport · 08-20-2009, 02:45 PM

Quote:

Originally Posted by s2kdagjd

so i cant use my kw1's on this?

Yes, if you are able to get the KW V1 E9X M3 rear dampers.

Gen_E92 · 09-24-2009, 08:56 PM

these things look serious...can't wait to put them on!

big thanks to Harold for all the great help!

HP Autosport · 10-02-2009, 11:28 AM

Quote:

Originally Posted by Prowess Symphony

These should work on the xi, right? Since the xi rear is the same as i.

Yes, you are correct.

Harold

HP Autosport · 08-05-2010, 03:26 AM

We offer this kit with the correct rear verticle headlight adjusting bracket and spool pieces for Koni and AST dampers.

HP Autosport · 08-07-2011, 04:10 AM

If you guys are looking to get these, get them now. We have seen a price hike from BMW on these M3 components. Our cost went up about $230 compare to this time last year.

HP Autosport · 11-15-2011, 11:34 PM

Just a reminder that the rear headlight aim bracket is not a piece from the M3, it is a custom piece we have engineered. The M3 bracket will NOT work on the non-M cars due to the different rear subframe.

mjollnir19 · 11-28-2011, 11:22 PM

wat is the part # of this specific part...?

HP Autosport · 02-03-2012, 11:39 AM

Quote:

Originally Posted by mjollnir19

wat is the part # of this specific part...?

This is sold in a kit form only and has does not carry a part# that will cross to another vendor.

HP Autosport · 01-23-2013, 07:39 PM

Bump!

HP Autosport · 06-25-2013, 08:17 PM

Bump!

03-31-2009, 12:58 AM	#1
HP Autosport Supreme Allied Commander 4091 Rep 55,822 Posts Drives: F80 M3 Join Date: Mar 2007 Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com iTrader: (36)	M3 rear lower camber link conversion kit for all E82/E9x 1 and 3 series One of the last two remaining rear-end pieces to complete your E9X M3 suspension conversion. The other being the rear toe link, which is still under developement, but will be available soon. This R&D process took several weeks to complete, but it is finally done and is available for ALL E82/E9X 1 and 3 series owners. Rear E9X M3 light weight alloy lower camber links will replace the heavy 135i and 335i steel counter parts. The M3 camber link is a good 2 lbs!!! lighter per unit and is much stronger in design with less flex. The dampers will be better positioned to have a quicker reaction time to bumps and no longer be in the soft and flexible 135i/335i rubber saddles. Height adjuster, coil-over style spring with spring thrust sheets will be used. although not required, but highly recommended. We offer spring rates from 400 in/lb all the way to over 1000 in/lbs(Any spring rates over 800lbs will require a custom rear damper). Dampers can be Koni single or double adjustable units valved properly to handle most of the spring rates we toss at them. AST and KW will soon be available as well. See the full R&D write-up here: http://www.e90post.com/forums/showthread.php?t=227480 All mounting hardware is included with the proper headlight verticle aim bracket. Benefits: -Light weight aluminum -Stronger then the 335i links by design -Less flex -Better rear damper mounting for faster damper reaction time If you already have Koni dampers, you can choose to replace the rear dampers only in either single or double adjustable variety. If you are on KW(May be an option at a later date), Bilstein, Tein, etc. It is our recommendation to convert to either Koni or AST at this time. Alternatively, if you need a complete coil-over set-up, we offer AST and Koni single or double adjustable coil-over kits. Choose our custom Swift springs for the ultimate in handling for your BMW. Swift's R & D team created material, called H5S.TW, which is stronger then regular silicone chrome material. Because of this material, they could make the spring wire thinner, and could wind the springs with fewer coils, which greatly decreased weight while dramatically increasing available stroke. Benefits: -Lighter Unsprung Mass -Smoother Weight Transfer -Better Ride Quality -Lower Tire Temperature -Increased ability to anticipate vehicle reaction Price at $555.15 Orders may be placed here: http://www.hpashop.com/product.sc?ca...3&productId=74 Attached Images Last edited by HP Autosport; 08-07-2011 at 04:08 AM..
	Appreciate 0 Tweet

04-07-2009, 02:15 AM	#2
HP Autosport Supreme Allied Commander 4091 Rep 55,822 Posts Drives: F80 M3 Join Date: Mar 2007 Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com iTrader: (36)	The AST and Koni coil-overs can be had in Single Adjust, Double Adjust or Triple Adjust(AST only). Just about any spring rates of your choice or we can recommend one for the type of driving you do.
	Appreciate 0

05-08-2009, 01:05 PM	#3
HP Autosport Supreme Allied Commander 4091 Rep 55,822 Posts Drives: F80 M3 Join Date: Mar 2007 Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com iTrader: (36)	Full AST and TCKline Coilvers can be shipped along with the M3 rear lower camber link conversion kits.
	Appreciate 0

05-26-2009, 07:51 PM	#4
HP Autosport Supreme Allied Commander 4091 Rep 55,822 Posts Drives: F80 M3 Join Date: Mar 2007 Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com iTrader: (36)	KW coilover system with Swift springs are possible now. Serious inquiries only please. Last edited by HP Autosport; 05-26-2009 at 08:08 PM..
	Appreciate 0

07-22-2009, 12:53 PM	#5
HP Autosport Supreme Allied Commander 4091 Rep 55,822 Posts Drives: F80 M3 Join Date: Mar 2007 Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com iTrader: (36)	Lower camber link conversion kits are in stock and ready to ship!
	Appreciate 0

07-23-2009, 06:10 PM	#6
enigmaticdream Private First Class 5 Rep 120 Posts Drives: 2004 M3 Join Date: Jul 2009 Location: Raleigh, NC iTrader: (0)	That's pretty damn cool. I wouldn't mind getting some of those hehe. __________________ 1987 325is 1988 M3 1995 525iT Manual or GTFO
	Appreciate 0

07-24-2009, 02:24 PM	#7
s2kdagjd Lieutenant 48 Rep 468 Posts Drives: G05 M50i Join Date: Dec 2007 Location: OC iTrader: (5)	so i cant use my kw1's on this?
	Appreciate 0

07-24-2009, 02:27 PM	#8
lpphreakx06 Professional Moose Racer 324 Rep 7,509 Posts Drives: SG 335i E92 RIP + 2015 SS M3 Join Date: Jul 2008 Location: Bellevue, Wa iTrader: (25)	^Nope. __________________ Visit my blog anytime: http://www.sfpayments.com BMW Dream Team PNW Chapter, member #1 \|HP Autowerks \| AR DESIGN \| BMW PERFORMANCE \| STOP TECH \| Volk Racing\| AMS \| ARKYM
	Appreciate 0

09-24-2009, 08:56 PM	#10
Gen_E92 Brigadier General 120 Rep 3,430 Posts Drives: slow Join Date: Oct 2006 Location: Vancouver iTrader: (17) Garage List 2007 335i [7.80]	these things look serious...can't wait to put them on! big thanks to Harold for all the great help! Attached Images
	Appreciate 0

08-05-2010, 03:26 AM	#12
HP Autosport Supreme Allied Commander 4091 Rep 55,822 Posts Drives: F80 M3 Join Date: Mar 2007 Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com iTrader: (36)	We offer this kit with the correct rear verticle headlight adjusting bracket and spool pieces for Koni and AST dampers.
	Appreciate 0

08-07-2011, 04:10 AM	#13
HP Autosport Supreme Allied Commander 4091 Rep 55,822 Posts Drives: F80 M3 Join Date: Mar 2007 Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com iTrader: (36)	If you guys are looking to get these, get them now. We have seen a price hike from BMW on these M3 components. Our cost went up about $230 compare to this time last year.
	Appreciate 0

11-15-2011, 11:34 PM	#14
HP Autosport Supreme Allied Commander 4091 Rep 55,822 Posts Drives: F80 M3 Join Date: Mar 2007 Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com iTrader: (36)	M3 camber link coversion Just a reminder that the rear headlight aim bracket is not a piece from the M3, it is a custom piece we have engineered. The M3 bracket will NOT work on the non-M cars due to the different rear subframe.
	Appreciate 0

11-28-2011, 11:22 PM	#15
mjollnir19 Major 67 Rep 1,284 Posts Drives: BMW 335i DINAN 3 Join Date: Nov 2010 Location: NJ iTrader: (13) Garage List 2009 BMW E90 335i LCI [9.50]	wat is the part # of this specific part...?
	Appreciate 0

01-23-2013, 07:39 PM	#17
HP Autosport Supreme Allied Commander 4091 Rep 55,822 Posts Drives: F80 M3 Join Date: Mar 2007 Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com iTrader: (36)	M3 camber link conversion kit Bump!
	Appreciate 0

06-25-2013, 08:17 PM	#18
HP Autosport Supreme Allied Commander 4091 Rep 55,822 Posts Drives: F80 M3 Join Date: Mar 2007 Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com iTrader: (36)	Bump!
	Appreciate 0

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search