[335xituned]

Im actualy going to use heat temp seal like on the e92 so if i ever wana keep moding it i can bake it 10 minutes and open it and thanks im actualy going to do some shruds bars on the corner to get and lci type of look and see how it looks as for the euro verson i would assume so but not sure

And yes its doable how ever id highly recomnd getting a non working light like i did to practice my set of headlight deffenetly came out alot cleaner

[DC_Oldboy]

Originally Posted by mapleridge

I live about 15 minutes from the canada us border.

Hmm I should take a road trip up there. What would you charge me to get that look?

[mapleridge]

Originally Posted by E90tuned

as for the euro verson i would assume so but not sure

And yes its doable how ever id highly recomnd getting a non working light like i did to practice my set of headlight deffenetly came out alot cleaner

I did a euro set of LCI lights. Same deal. Permasealed. Also, this advice is key. Get some practice lights. I botched the first light.

[335xituned]

+1 would of been mad if this was my actualy light came out good but could of done a way cleaner job and not i knw exacly how to serate everything apart

[scanboy]

Originally Posted by mapleridge

I did a euro set of LCI lights. Same deal. Permasealed. Also, this advice is key. Get some practice lights. I botched the first light.

Good to know, thanks.

[scanboy]

Originally Posted by E90tuned

Im actualy going to use heat temp seal like on the e92 so if i ever wana keep moding it i can bake it 10 minutes and open it and thanks im actualy going to do some shruds bars on the corner to get and lci type of look and see how it looks as for the euro verson i would assume so but not sure

And yes its doable how ever id highly recomnd getting a non working light like i did to practice my set of headlight deffenetly came out alot cleaner

Thanks. This does actually give me enough positive info that I might do it later. Nice job

[335xituned]

No problem im awaiting led rings and will post final prodect

[RimasRS]

damn who can tell me E82 AE ring size?