[Zajac1]

Is anyone know where i have to plug it in the yellow and the white trigger with power relay ??

[Zajac1]

Help : )

[Shinzi]

I didnt use the harness.. tapped my V4's directly into the original AE harness

[Zajac1]

Originally Posted by Shinzi

I didnt use the harness.. tapped my V4's directly into the original AE harness

do they work correctly ?? any problems with codes ??

[Zajac1]

???

[Zajac1]

if i will get any errors i can install resistors ?? If yes what kind ?

[Shinzi]

Originally Posted by Zajac1

do they work correctly ?? any problems with codes ??

No problems at all. Everything works fine.. no errors.

[TommyLights]

You WILL get errors unless you use resistors or get the car coded, sunce our cars use 55watts on the oem bulb, whereas the orions use only 35 watts. Brown to brown (negative) and white to power.

[Zajac1]

Originally Posted by tomz_335i

You WILL get errors unless you use resistors or get the car coded, sunce our cars use 55watts on the oem bulb, whereas the orions use only 35 watts. Brown to brown (negative) and white to power.

so what i can do ?? :/

[TommyLights]

^^Why are you asking that if the solution is in my initial response? Either code or use resistors. When you get the resistor, one side goes into the power wire and the other into the ground wire.

[Zajac1]

Originally Posted by tomz_335i

^^Why are you asking that if the solution is in my initial response? Either code or use resistors. When you get the resistor, one side goes into the power wire and the other into the ground wire.

what kind of resistors should i use ??

[TommyLights]

You can use the standard bulb resistors they sell all over ebay.

[GI335I]

Originally Posted by tomz_335i

You WILL get errors unless you use resistors or get the car coded, sunce our cars use 55watts on the oem bulb, whereas the orions use only 35 watts. Brown to brown (negative) and white to power.

even for the orion v4s?

[TommyLights]

Originally Posted by GiorgioIr

even for the orion v4s?

V4's also use 35 watts. I have built many headlights with V4, same issue.

[GI335I]

Originally Posted by tomz_335i

V4's also use 35 watts. I have built many headlights with V4, same issue.

:< the sneaky bastards, I've asked Umnitza if I have to code the vehicule or add a resistor and they replied with "V4 are wired to the 12V circuit" I've assumed they are p&p. Do you usually code the vehicule or add a resistor? and what type of resistor should I search for in amazon since I'm about to buy v4's

[TommyLights]

That wasnt an answer to your question, since they are 12v, 35 watts. Ihave them coded.

[Zajac1]

[QUOTE=GiorgioIr;13143452]:< the sneaky bastards, I've asked Umnitza if I have to code the vehicule or add a resistor and they replied with "V4 are wired to the 12V circuit" I've assumed they are p&p. Do you usually code the vehicule or add a resistor? and what type of resistor should I search for in amazon since I'm about to buy v4's [

This same told me with v2. I need to code them.

[Wei718]

I'm wondering would this work.

Since the V4's are 12v relay powered which means you'll only need to tap the trigger wire that sees 12v when the vehicle is on. Then of course you cannot leave the original AE bulb slot empty. I am thinking maybe you can install a set of color matched led AE kit in there that way you don't get a code.

Worth a try maybe!

[Karman]

tom do you offer this service? im gonna buy either the v4 or the multicolor v2 let me know if you are willing to install and black out.

[TommyLights]

Yes I do....pm me.

[Najt]

i am going to buy v2 multicolor AE from Umnitza. I do have proper DCAN cable. What do I have to code??

thx

[Najt]