Yet another oil leak

scotty_miller · 12-18-2013, 11:15 PM

Is it the oil filter housing gasket leaking or the cylinder head gasket that is leaking. Sorry for the crappy iPhone pics

scotty_miller · 12-18-2013, 11:16 PM

More pics

scotty_miller · 12-18-2013, 11:18 PM

The bottom of the oil filter housing is oily but could it leak that much and cause that much of a spread?

12-19-2013, 01:19 PM

Hope its not the cylinder gasket... Cost 1200 but warranty covered it

e9012345 · 12-19-2013, 08:00 PM

Just change your valve cover gasket and oil filter housing gasket... couple hundred bucks tops..

Once you change your clutch - do your rear-main seal

Problems solved

GoRomeo · 12-19-2013, 08:14 PM

We are starting to see more and more of these.

In your case, It seems like is both. Get quotes from shops around your area if not DIY it. The oil hausing gasket is easier to change in our cars so therefore should be a bit cheaper, but eventually you will have to change the valve cover gasket as well.

Do the oil housing gasket first then do a wash on your engine and see if you still have a leak. If you do, then the valve cover gasket is next. Cheers!

scotty_miller · 12-19-2013, 09:46 PM

Quote:

Originally Posted by GoRomeo

We are starting to see more and more of these.

In your case, It seems like is both. Get quotes from shops around your area if not DIY it. The oil hausing gasket is easier to change in our cars so therefore should be a bit cheaper, but eventually you will have to change the valve cover gasket as well.

Do the oil housing gasket first then do a wash on your engine and see if you still have a leak. If you do, then the valve cover gasket is next. Cheers!

Thanks man I checked the valve cover gasket and it was dry as a bone. I pressure washed my engine tonight and thankfully the oil is only coming from the oil filter housing so off to the dealership to buy the gasket tomorrow! Thank god it was only the oil filter gasket

Tim603 · 12-20-2013, 10:14 AM

I have the same problem on my car right now. The gasket on the oil filter housing is pretty much toast and is leaking. Im bringing it into bmw in two weeks, a little over $500. I was going to do it myself but im in new england and the snow makes it very annoying to diy in the winter when it comes to stuff like this, especially since you have to drain the coolant when doing the gasket change

12-18-2013, 11:15 PM	#1
scotty_miller Captain 187 Rep 940 Posts Drives: 2003.5 E46 M3 Join Date: May 2013 Location: Hollidaysburg, PA iTrader: (13)	Yet another oil leak Is it the oil filter housing gasket leaking or the cylinder head gasket that is leaking. Sorry for the crappy iPhone pics Attached Images __________________ You'll find me at the track BMW CCA Club Racing #905 Instagram: scottynotpippen
	Appreciate 0 Tweet Quote

12-18-2013, 11:16 PM	#2
scotty_miller Captain 187 Rep 940 Posts Drives: 2003.5 E46 M3 Join Date: May 2013 Location: Hollidaysburg, PA iTrader: (13)	More pics Attached Images __________________ You'll find me at the track BMW CCA Club Racing #905 Instagram: scottynotpippen
	Appreciate 0 Quote

12-18-2013, 11:18 PM	#3
scotty_miller Captain 187 Rep 940 Posts Drives: 2003.5 E46 M3 Join Date: May 2013 Location: Hollidaysburg, PA iTrader: (13)	The bottom of the oil filter housing is oily but could it leak that much and cause that much of a spread? __________________ You'll find me at the track BMW CCA Club Racing #905 Instagram: scottynotpippen
	Appreciate 0 Quote

12-19-2013, 01:19 PM	#4
BMW.. Guest 0 Rep n/a Posts Drives:	Hope its not the cylinder gasket... Cost 1200 but warranty covered it
	Appreciate 0 Quote

12-19-2013, 08:00 PM	#5
e9012345 Lieutenant 29 Rep 430 Posts Drives: e90 Join Date: Feb 2012 Location: North York iTrader: (0)	Just change your valve cover gasket and oil filter housing gasket... couple hundred bucks tops.. Once you change your clutch - do your rear-main seal Problems solved __________________ 6MT Sport Pkg \| BMW Perf. Pedals \| BMW Perf. SSK \| CF Steering Trim \| BMW Performance Black Gloss Grilles \| M3 Rep Bumper \| Muffler Delete 2.5"\| Charcoal Delete + K&N Drop In \| CDV Delete \| Clutch Stop \| Active Autowerke Stage II Tune \| H&R Sport Springs \| Koni Yellow Shocks/Struts \| 18" Gunmetal CSL Reps \| BurgerTuning Spacers \| Staggered Ventus V12's \| ATE Super Blue & Hawk HPS \| Blacklines \| GP6K Angel Eyes
	Appreciate 0 Quote

12-19-2013, 08:14 PM	#6
GoRomeo Brigadier General 1259 Rep 4,169 Posts Drives: 330i, 135i Join Date: Feb 2006 Location: San Diego CA iTrader: (0) Garage List 2008 BMW 135i [9.50] 2006 330i [6.75]	We are starting to see more and more of these. In your case, It seems like is both. Get quotes from shops around your area if not DIY it. The oil hausing gasket is easier to change in our cars so therefore should be a bit cheaper, but eventually you will have to change the valve cover gasket as well. Do the oil housing gasket first then do a wash on your engine and see if you still have a leak. If you do, then the valve cover gasket is next. Cheers!
	Appreciate 0 Quote

12-20-2013, 10:14 AM	#8
Tim603 Colonel 488 Rep 2,283 Posts Drives: 2007 335i E90 Join Date: Feb 2012 Location: North Canton, OH iTrader: (8) Garage List 2007 335i [0.00]	I have the same problem on my car right now. The gasket on the oil filter housing is pretty much toast and is leaking. Im bringing it into bmw in two weeks, a little over $500. I was going to do it myself but im in new england and the snow makes it very annoying to diy in the winter when it comes to stuff like this, especially since you have to drain the coolant when doing the gasket change __________________ Build Thread
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search