E90Post
 


 
BMW 3-Series (E90 E92) Forum > BMW E90/E92/E93 3-series General Forums > Regional Forums > UK > UK Technical Forum > Pre-lci Halogen to Pre-lci Xenon Conversion



Reply
 
Thread Tools Search this Thread
      03-26-2014, 02:29 PM   #1
ben.bell1987
Private
7
Rep
97
Posts

Drives: 2012 F10 520D M Sport
Join Date: Jun 2013
Location: Newcastle Upon-Tyne, UK

iTrader: (0)

Pre-lci Halogen to Pre-lci Xenon Conversion

Hi

Apologies if this has already been answered but planning a Pre-lci Halogen to Pre-lci Xenon. Plugged the lights in and the angel eyes light up but not the xenons. Question is does it just need coding or is the wiring different too?

Read something about needing FRM3 which I don't believe my car has.

My car is a 57 plate E90 Pre-lci btw.

Many Thanks in advance.

Last edited by ben.bell1987; 03-27-2014 at 09:41 AM..
Appreciate 0
      03-27-2014, 09:41 AM   #2
ben.bell1987
Private
7
Rep
97
Posts

Drives: 2012 F10 520D M Sport
Join Date: Jun 2013
Location: Newcastle Upon-Tyne, UK

iTrader: (0)

Anyone?
Appreciate 0
      03-27-2014, 12:49 PM   #3
Sensible_
Colonel
532
Rep
2,503
Posts

Drives: 2008 E90
Join Date: Feb 2012
Location: London

iTrader: (1)

Your car will need to be coded. In short you need to tell the cars Vehicle Order that it now has Xenon Headlights. Then tell disable auto levelling (unless you have done a complete retrofit).

You can do the coding very easily with NCS-Expert and a DCAN cable.
Appreciate 0
      03-28-2014, 07:16 AM   #4
ben.bell1987
Private
7
Rep
97
Posts

Drives: 2012 F10 520D M Sport
Join Date: Jun 2013
Location: Newcastle Upon-Tyne, UK

iTrader: (0)

Quote:
Originally Posted by Sensible_ View Post
Your car will need to be coded. In short you need to tell the cars Vehicle Order that it now has Xenon Headlights. Then tell disable auto levelling (unless you have done a complete retrofit).

You can do the coding very easily with NCS-Expert and a DCAN cable.
Thank you very much, after reading around it looks like I need to add $522 to the vehicle order.

Just need confirmation that I didn't need need additional wiring for the xenons to work?

I am ok with with disabling the auto levelling.
Appreciate 0
      03-28-2014, 07:40 AM   #5
Silverbmw328
Private
Silverbmw328's Avatar
United Kingdom
5
Rep
62
Posts

Drives: Alpina D3
Join Date: May 2012
Location: Bedford

iTrader: (0)

Hi Ben, What are you thinking of fitting as I'm considering this ?
__________________
E90 Alpina D3 MT :No 566 Titan Silver
E36 328i sport
E34 525i sport
E28 528i (86)
Appreciate 0
      03-28-2014, 07:47 AM   #6
Deeg
Enlisted Member
Deeg's Avatar
4
Rep
39
Posts

Drives: Alpina D3
Join Date: May 2013
Location: aberdeen

iTrader: (0)

Quote:
Originally Posted by Silverbmw328 View Post
Hi Ben, What are you thinking of fitting as I'm considering this ?
+1

I'd consider this also if its fairly simple? and just a straight swap out and coding.
Appreciate 0
      03-28-2014, 08:23 AM   #7
ben.bell1987
Private
7
Rep
97
Posts

Drives: 2012 F10 520D M Sport
Join Date: Jun 2013
Location: Newcastle Upon-Tyne, UK

iTrader: (0)

Quote:
Originally Posted by Deeg View Post
+1

I'd consider this also if its fairly simple? and just a straight swap out and coding.
Great, i'll give that a go tonight.

I am just planning on a straight swap but changing the angel eyes to Lux or something similar to match 6000k bulbs.

Probably going to chance it with no washers or self levelling.
Appreciate 0
      03-28-2014, 12:37 PM   #8
Sensible_
Colonel
532
Rep
2,503
Posts

Drives: 2008 E90
Join Date: Feb 2012
Location: London

iTrader: (1)

Quote:
Originally Posted by ben.bell1987
Quote:
Originally Posted by Sensible_ View Post
Your car will need to be coded. In short you need to tell the cars Vehicle Order that it now has Xenon Headlights. Then tell disable auto levelling (unless you have done a complete retrofit).

You can do the coding very easily with NCS-Expert and a DCAN cable.
Thank you very much, after reading around it looks like I need to add $522 to the vehicle order.

Just need confirmation that I didn't need need additional wiring for the xenons to work?

I am ok with with disabling the auto levelling.
I think you will get away with your current wiring. I've only done this conversion on a PRE-LCI vehicle with LCI XENONS in which case it needs new wiring / harness if I remember correctly. If you are using PRE-LCI xenons I guess you'll be ok with just coding it into the VO and disabling auto levelling.
Appreciate 0
      03-28-2014, 02:37 PM   #9
bazz780
Captain
bazz780's Avatar
70
Rep
810
Posts

Drives: E92 330d m sport
Join Date: Nov 2011
Location: london

iTrader: (0)

I would do this too if its a case of swapping headlights and coding, can someone confirm?

Regards
Appreciate 0
      04-02-2014, 04:21 PM   #10
ben.bell1987
Private
7
Rep
97
Posts

Drives: 2012 F10 520D M Sport
Join Date: Jun 2013
Location: Newcastle Upon-Tyne, UK

iTrader: (0)

I have added $522 to the VO for both the CAS, FRM and the NFRM, plugged the headlight in to test and only the angel eyes light up, nothing from the xenon. High beams work when flashing.

Is there anything else I need to code or does it need rewiring?
Appreciate 0
      04-03-2014, 05:00 AM   #11
bishbosh
Colonel
983
Rep
2,167
Posts

Drives: F30 335d
Join Date: Oct 2013
Location: Sheffield

iTrader: (1)

Garage List
2014 BMW 335d  [0.00]
I did a pre-lci halogen to pre-lci xenon conversion.

Full details can be found here http://www.e90post.com/forums/showthread.php?t=912413

Your xenons aren't lighting up because you need an extra earth wire.
The genuine BMW aftermarket wiring harness has this.

Or you could bridge pins 2 and 4 in the headlight socket.

Cheers
Appreciate 0
      04-03-2014, 10:42 AM   #12
ben.bell1987
Private
7
Rep
97
Posts

Drives: 2012 F10 520D M Sport
Join Date: Jun 2013
Location: Newcastle Upon-Tyne, UK

iTrader: (0)

Quote:
Originally Posted by bishbosh View Post
I did a pre-lci halogen to pre-lci xenon conversion.

Full details can be found here http://www.e90post.com/forums/showthread.php?t=912413

Your xenons aren't lighting up because you need an extra earth wire.
The genuine BMW aftermarket wiring harness has this.

Or you could bridge pins 2 and 4 in the headlight socket.

Cheers
Thanks for the help, can you buy the harness from BMW?

Also what do you mean by bridge pins 2 and 4?
Appreciate 0
      04-04-2014, 05:27 AM   #13
Sensible_
Colonel
532
Rep
2,503
Posts

Drives: 2008 E90
Join Date: Feb 2012
Location: London

iTrader: (1)

http://www.online-parts.co.uk/bmw/ad...7#.Uz56Cni9LCQ

Double check it's the correct one as I'm not sure of the differences between LCI and pre LCI wiring.

The term 'bridge' just means connect those two pins together. It's an easy fix, but I'd personally go for the full retrofit.
Appreciate 0
      04-04-2014, 04:47 PM   #14
ben.bell1987
Private
7
Rep
97
Posts

Drives: 2012 F10 520D M Sport
Join Date: Jun 2013
Location: Newcastle Upon-Tyne, UK

iTrader: (0)

Quote:
Originally Posted by Sensible_ View Post
http://www.online-parts.co.uk/bmw/ad...7#.Uz56Cni9LCQ

Double check it's the correct one as I'm not sure of the differences between LCI and pre LCI wiring.

The term 'bridge' just means connect those two pins together. It's an easy fix, but I'd personally go for the full retrofit.
Just tried the bridge and it worked a treat! Thank you very much Sensible!

Bit gutted though, I ordered the cable earlier today from BMW so not sure whether to return it and save myself £30 + VAT or just sell it on here.

Fitting them tomorrow and coding out the bulb errors
Appreciate 0
      04-07-2014, 03:06 AM   #15
bishbosh
Colonel
983
Rep
2,167
Posts

Drives: F30 335d
Join Date: Oct 2013
Location: Sheffield

iTrader: (1)

Garage List
2014 BMW 335d  [0.00]
IMO the BMW cable is the better solution.

1. It's part of the official retrofit.
2. You will have proper full beam and flash to pass function. One the wires in the BMW cable runs to the FRM (footwell module) which enables the bixenon full beam function.

You don't need to have this wire but if not you must bridge pins 5 + 6 (I think). However your flash to pass lights (the halogen ones) come on with the full beam. It's not as clean a solution really.

The loom also includes the connectors to work with the levelling sensors as you'll see in my thread. If you don't have the levelling sensors the headlight beam angle will always be set to their lowest position so the light output won't be spread further down the road. This is so you are unlikely to blind oncoming traffic.

Cheers
Appreciate 0
      04-07-2014, 05:37 AM   #16
chargingbear
Private
5
Rep
61
Posts

Drives: E91 330D
Join Date: Oct 2012
Location: London

iTrader: (3)

So have you replaced halogens with xenons by just changing headlights, adding $522 to the VO for both the CAS, FRM and the NFRM and finally bridge pins 2 and 4 in the headlight socket.

If thats all thats required that is relatively simple, however, theres no auto levelling and washers; is this okay for MOT?
Appreciate 0
      04-07-2014, 05:52 AM   #17
ben.bell1987
Private
7
Rep
97
Posts

Drives: 2012 F10 520D M Sport
Join Date: Jun 2013
Location: Newcastle Upon-Tyne, UK

iTrader: (0)

Quote:
Originally Posted by chargingbear View Post
So have you replaced halogens with xenons by just changing headlights, adding $522 to the VO for both the CAS, FRM and the NFRM and finally bridge pins 2 and 4 in the headlight socket.

If thats all thats required that is relatively simple, however, theres no auto levelling and washers; is this okay for MOT?
Yes, just added $522 to the VO replaced the headlights, also have to bridge pins 2 and 4 or buy the harness (61120395932) and remove the bulb warnings. A couple of hours work but well worth it.

I have not fitted levelling sensors or washers which make it completely legit but by default it points towards the road so no dazzling anyone (thanks bishbosh) It depends where you go for an MOT, some are more lenient than others. I have passed with a HID kit in Halogen headlights so should be fine.
Appreciate 0
      04-07-2014, 05:52 AM   #18
bishbosh
Colonel
983
Rep
2,167
Posts

Drives: F30 335d
Join Date: Oct 2013
Location: Sheffield

iTrader: (1)

Garage List
2014 BMW 335d  [0.00]
Me? No, I used the loom and sourced levelling sensors. Oh and a new light switch as I don't need the dial for headlamp beam adjustment. It's all in my thread I linked to earlier.

Regarding the MOT, levelling sensors and headlight washers are NOT required for the MOT.
I don't have washers and my car passed it's MOT last month.
Appreciate 0
      04-07-2014, 11:44 AM   #19
Sensible_
Colonel
532
Rep
2,503
Posts

Drives: 2008 E90
Join Date: Feb 2012
Location: London

iTrader: (1)

Quote:
Originally Posted by bishbosh
Me? No, I used the loom and sourced levelling sensors. Oh and a new light switch as I don't need the dial for headlamp beam adjustment. It's all in my thread I linked to earlier.

Regarding the MOT, levelling sensors and headlight washers are NOT required for the MOT.
I don't have washers and my car passed it's MOT last month.
Awesome retrofit dude! Nice diy guide as well.

Re MOT and washers / levellers. I was under the understanding they had to be working for MOT, IF fitted. If they aren't fitted, MOT rules do not apply to them.
Appreciate 0
      04-07-2014, 04:32 PM   #20
bishbosh
Colonel
983
Rep
2,167
Posts

Drives: F30 335d
Join Date: Oct 2013
Location: Sheffield

iTrader: (1)

Garage List
2014 BMW 335d  [0.00]
Quote:
Originally Posted by Sensible_ View Post
Awesome retrofit dude! Nice diy guide as well.

Re MOT and washers / levellers. I was under the understanding they had to be working for MOT, IF fitted. If they aren't fitted, MOT rules do not apply to them.
Thanks

Yes, that's my understanding too from reading the MOT wording.
Appreciate 0
      04-08-2014, 04:29 AM   #21
Deeg
Enlisted Member
Deeg's Avatar
4
Rep
39
Posts

Drives: Alpina D3
Join Date: May 2013
Location: aberdeen

iTrader: (0)

Bish Bosh,

Thanks for your full thread link, I'm seriously considering this as the next step for my D3, If I'm going to do this I'm going to do it correctly.

Will look in to it more and see what I'm up against, although the coding side of things is beyond what I can do. Might need to source someone who can help with that.

Cheers

Deeg
Appreciate 0
Reply

Bookmarks

Tags
coding, halogen, retrofit, xenon

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 02:32 PM.




e90post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST