Protuned 6466 335i vs 94mm silverado VS cam/nitrous z06

AK 335i · 06-18-2014, 03:44 PM

Protuned by Jake Hershorin @ PTF built by Proven Power Tampa

Vette does 138 last check in a while back before recent tweaks. Truck has done 147

I'm satisfied with the results having to let off the gas each time to shift to sAve the tranny

BoostedE90 · 06-18-2014, 03:55 PM

Nice run. Those are some fast competitors.
I'd like to see what would happen if you didn't have to lift off the gas.

georgelb · 06-18-2014, 04:18 PM

That truck...damn.

btrav1226 · 06-18-2014, 05:55 PM

Dude z06's are monsters. Nice run.

335NJ · 06-18-2014, 06:08 PM

Do you have any options to increase the strength of the trans?

AK 335i · 06-18-2014, 06:29 PM

Quote:

Originally Posted by Shafer

Do you have any options to increase the strength of the trans?

Lvl 10 or a company in aus is building the auto. But there are other issues now seen at the 700 plus whp mark for autos. They make too much noise similar to the dual mass flywheel causing high rpm and post shift false misfires. So I'm not gonna roll the dice. Going a diff route

Jeff@TopGearSolutions · 06-18-2014, 06:37 PM

Keep the videos coming!

AK 335i · 06-18-2014, 06:38 PM

Quote:

Originally Posted by Jeff@TopGearSolutions

Keep the videos coming!

I always do. Win or lose hahah

AK 335i · 06-18-2014, 06:43 PM

Yea that truck is no joke. And the vette is nasty as F. I'm sure he could pull off 140 without issue on a decent DA day

335NJ · 06-18-2014, 06:46 PM

Quote:

Originally Posted by AK 335i

Lvl 10 or a company in aus is building the auto. But there are other issues now seen at the 700 plus whp mark for autos. They make too much noise similar to the dual mass flywheel causing high rpm and post shift false misfires. So I'm not gonna roll the dice. Going a diff route

By different route, are you possibly suggesting MT?!

AK 335i · 06-18-2014, 06:49 PM

Quote:

Originally Posted by Shafer

By different route, are you possibly suggesting MT?!

2 realistic options that will work are 6mt or dog box. I'm exploring any other routes as well.

For now I'll rock 30-33 psi and let off to shift and have lots of fun still lol

Beau93315 · 06-18-2014, 06:54 PM

Quote:

Originally Posted by AK 335i

Going a diff route

It sounds like we are in the same boat, I am holding off on the shogun pump until I see different options for the auto tranny. I am running the VFF600, 70/30 meth with E30 I have not noticed any slipping at all however I will be dynoing on the 29th so I will be able to give you the numbers. I have pondered the level 10 transmission many times especially seeing Terry's 135i going strong. But until them aussies figure something out I wait

Quote:

Originally Posted by Shafer

By different route, are you possibly suggesting MT?!

Everyday.

AK have you any idea price wise on this(you can pm me if you prefer also interested in dogbox!)? Excluding a clutch and flywheel of course.

TurboSid · 06-18-2014, 07:08 PM

Nice Dan! I still need to see this thing in person.

AK 335i · 06-18-2014, 07:11 PM

Quote:

Originally Posted by Beau93315

It sounds like we are in the same boat, I am holding off on the shogun pump until I see different options for the auto tranny. I am running the VFF600, 70/30 meth with E30 I have not noticed any slipping at all however I will be dynoing on the 29th so I will be able to give you the numbers. I have pondered the level 10 transmission many times especially seeing Terry's 135i going strong. But until them aussies figure something out I wait

Everyday.

AK have you any idea price wise on this(you can pm me if you prefer also interested in dogbox!)? Excluding a clutch and flywheel of course.

The auto built or not should be fine all the way up to around 600wtq or 675whp. Over that is where the noise becomes an issue and until someone else makes the power I'm makin on a lvl 10 or other built 6at, I'm not taking the chance.

6mt swap could be done for a little more than or close to price of lvl 10 depending on who u know.
If level 10 wants to sponsor me I'll test their tranny out. And if it works at 750whp plus. Then we will have a new door open

Young_Man · 06-18-2014, 07:24 PM

That truck was pulling like a freight train lol. Nice runs.

06-18-2014, 03:44 PM	#1
AK 335i Major 50 Rep 1,290 Posts Drives: black 335i E90 Join Date: Sep 2012 Location: boynton beach iTrader: (0)	Protuned 6466 335i vs 94mm silverado VS cam/nitrous z06 Protuned by Jake Hershorin @ PTF built by Proven Power Tampa Vette does 138 last check in a while back before recent tweaks. Truck has done 147 I'm satisfied with the results having to let off the gas each time to shift to sAve the tranny __________________ - Proven Power Tampa Built 6466 ST N54 6AT WR 711whp 637wtq -
	Appreciate 0 Tweet Quote

06-18-2014, 03:55 PM	#2
BoostedE90 Lieutenant Colonel 60 Rep 1,690 Posts Drives: e90 335i 6MT Join Date: Nov 2007 Location: Tampa/Gainesville, FL iTrader: (5)	Nice run. Those are some fast competitors. I'd like to see what would happen if you didn't have to lift off the gas.
	Appreciate 0 Quote

06-18-2014, 04:18 PM	#3
georgelb nsomneeak 39 Rep 501 Posts Drives: E92 RB 335i Join Date: Apr 2010 Location: DFW, TX iTrader: (3) Garage List 2007 335i [8.00]	That truck...damn. __________________ RB Turbos w/ N20 TMAP Sensor \| 93 Octane Protune by Cobb Plano \| xHP Stage 3 \| BMS DCI \| STETT CP \| Forge DVs \| RB PCV \| Helix FMIC \| CP-E Catted DPs \| Walbro 450 \| Bilstein B12 \| M3 Control Arms \| Defiv Lockdown Kit \| BBS CH \| Michelin A/S 3+ Hixson BMW of Monroe, LA - Shady Dealer \|
	Appreciate 0 Quote

06-18-2014, 05:55 PM	#4
btrav1226 Major 24 Rep 1,040 Posts Drives: g80 M3 Join Date: Apr 2008 Location: new hampshire iTrader: (5)	Dude z06's are monsters. Nice run.
	Appreciate 0 Quote

06-18-2014, 06:08 PM	#5
335NJ Colonel 535 Rep 2,872 Posts Drives: 2008 335i 6MT E90 Join Date: Feb 2014 Location: NJ/Philadelphia Suburbs iTrader: (1)	Do you have any options to increase the strength of the trans? __________________ *BSM E90 6MT*-JB4 G5 ISO-BMS DCI-Golf-Tee Mod-Hankook S1N2 Non-RFT-ER Chargepipe/TiAL BOV-E40 blend-VRSF V2's-M3 CDV-MHD/JB4 FLASH-VRSF 5" STEPPED FMIC
	Appreciate 0 Quote

06-18-2014, 06:37 PM	#7
Jeff@TopGearSolutions 3474 Rep 79,211 Posts Drives: C6 Z06, 09 335i, 10 335xi Join Date: Dec 2008 Location: www.TopGearSolutions.com iTrader: (37)	Keep the videos coming!
	Appreciate 0 Quote

06-18-2014, 06:43 PM	#9
AK 335i Major 50 Rep 1,290 Posts Drives: black 335i E90 Join Date: Sep 2012 Location: boynton beach iTrader: (0)	Yea that truck is no joke. And the vette is nasty as F. I'm sure he could pull off 140 without issue on a decent DA day
	Appreciate 0 Quote

06-18-2014, 07:08 PM	#13
TurboSid Brigadier General 1149 Rep 3,269 Posts Drives: 2022 M4Cx BSM/FR Join Date: Apr 2008 Location: Florida iTrader: (4) Garage List 2008 335i [0.00]	Nice Dan! I still need to see this thing in person. __________________ 2022 BSM/FR M4 Competition X-Drive 2017 MW/SO M4 ZCP [SOLD] • 2015 MW/SO M4 M-DCT FBO [SOLD] • 2011 AW/CR 335is DCT FBO [SOLD] • 2008 AW/CR 335i 6MT FBO [SOLD]
	Appreciate 0 Quote

06-18-2014, 07:24 PM	#15
Young_Man Lieutenant 42 Rep 568 Posts Drives: E90 335i Join Date: Jun 2011 Location: Earth iTrader: (4)	That truck was pulling like a freight train lol. Nice runs. __________________ AA Signature Exhaust / AA 3" Catless Downpipes / VRSF 7" FMIC / AFE Dual Cone Intake / ER Charge Pipe / Tial Q BOV / RPI Scoops / RB Upgraded PCV & Cap / BMS OCC / Alpina Trans Flash / Powered by JB4 G5 ISO
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search