Procede v2.0.1 expected HP for stock car?

Ander · 11-23-2007, 01:07 AM

What is the expected HP for stock car (no back cat, down pipe, intake mods) using Procede v2.0.1 and 93 octane?

Never got a clear answer from dynos using cat backs

stillclaimndp · 11-23-2007, 01:11 AM

345-350hp to the wheels on an otherwise stock car.

Tuned335i · 11-23-2007, 01:12 AM

I believe Shiv posted that on 93 octane and the default map settings, the WHTQ is somewhere around 380. Do a search on his posts, I think it was a day or two ago and was in a discussion about how the 100% settings are really only for if you're running a race gas mix that produces a very high octane (96+ I believe it was). Someone correct me if that's inaccurate.

Tuned335i · 11-23-2007, 01:13 AM

Quote:

Originally Posted by stillclaimndp

345-350hp to the wheels on an otherwise stock car.

Thanks for the correction. I thought it was higher. My bad...

Ander · 11-23-2007, 01:17 AM

6mt assuming 15% drivetrain loss:
405 to 410 crank hp

and it NOW likes to rev like a banshee to redline

Is it true that Shiv said this is his "conservative" v2 map?

335iheLLraiseR · 11-23-2007, 01:58 AM

Quote:

Originally Posted by Ander

6mt assuming 15% drivetrain loss:
405 to 410 crank hp

and it NOW likes to rev like a banshee to redline

Is it true that Shiv said this is his "conservative" v2 map?

yes, its true. we can only imagine.

E90ice · 11-23-2007, 01:58 AM

V2 with 2.0.1 map should make around 350whp.

but remember it's not always about the peak, but also for how long that power is available throughout the rev range...in this case a nice advantage over PROcede 1.4x

JayE93 · 11-25-2007, 02:38 PM

Quote:

Originally Posted by stillclaimndp

345-350hp to the wheels on an otherwise stock car.

so what would one have to do to reach 400hp with V2?

e90AW335i · 11-25-2007, 02:41 PM

Quote:

Originally Posted by JayE93

so what would one have to do to reach 400hp with V2?

Depends if your on race gas or not....

Driver72 · 11-25-2007, 03:10 PM

Quote:

Originally Posted by JayE93

so what would one have to do to reach 400hp with V2?

First you need v2.02 (which hasn't been officially released yet)
You need to have the settings on 100% and you need 93 Octane
You'll need the Riss Racing Catless DP's and a good aftermarket exhaust.

Then for good measure you can get 3-4 rwhp with a high flow drop in filter by K&N or ITG.

With a manual tranny, you then should touch the 400 rwhp mark (or really close).
With the auto you'll probably be somewhere in the 385-390 ish range.

This is pure guesstimate though, but couldn't imagine it's off by much.

11-23-2007, 01:07 AM	#1
Ander Enlisted Member 6 Rep 46 Posts Drives: 2007 e90 335i Join Date: Apr 2007 Location: Florida iTrader: (0)	Procede v2.0.1 expected HP for stock car? What is the expected HP for stock car (no back cat, down pipe, intake mods) using Procede v2.0.1 and 93 octane? Never got a clear answer from dynos using cat backs
	Appreciate 0 Tweet Quote

11-23-2007, 01:11 AM	#2
stillclaimndp Dancing Machine 50 Rep 1,419 Posts Drives: 335i e90 ZSP Join Date: Aug 2007 Location: Walnut Creek, Ca iTrader: (0)	345-350hp to the wheels on an otherwise stock car. __________________ 2007 e90 & 1981 Corvette Predecessors: 2007 BMW 335i E92, 2006 M5, 2008 Viper SRT10 Coupe, 2005 Viper Yellow, 2006 Corvette Z51, 2009 Challenger SRT8, 2006 S4, 2001.5 Nogaro Blue S4, 2006 GTI w/ DSG, 06 Evo IX, 04 S4, 04 911x51, 03 Evo VIII, 98 Eclipse GSX, 96 GST, 92 Galant Vr-4, '70 Grand Prix Model J, '70 Nova, '68 Firebird
	Appreciate 0 Quote

11-23-2007, 01:12 AM	#3
Tuned335i Major 24 Rep 1,310 Posts Drives: E92 335i Join Date: Jun 2007 Location: World of Torque iTrader: (0)	I believe Shiv posted that on 93 octane and the default map settings, the WHTQ is somewhere around 380. Do a search on his posts, I think it was a day or two ago and was in a discussion about how the 100% settings are really only for if you're running a race gas mix that produces a very high octane (96+ I believe it was). Someone correct me if that's inaccurate. __________________ Torque - The One You Love...
	Appreciate 0 Quote

11-23-2007, 01:17 AM	#5
Ander Enlisted Member 6 Rep 46 Posts Drives: 2007 e90 335i Join Date: Apr 2007 Location: Florida iTrader: (0)	6mt assuming 15% drivetrain loss: 405 to 410 crank hp and it NOW likes to rev like a banshee to redline Is it true that Shiv said this is his "conservative" v2 map?
	Appreciate 0 Quote

11-23-2007, 01:58 AM	#7
E90ice Banned 220 Rep 2,002 Posts Drives: 2008 335xi Coupe Join Date: May 2006 Location: WA iTrader: (0)	V2 with 2.0.1 map should make around 350whp. but remember it's not always about the peak, but also for how long that power is available throughout the rev range...in this case a nice advantage over PROcede 1.4x __________________
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search