|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Search | Today's Posts | Mark Forums Read |
|
BMW 3-Series (E90 E92) Forum
>
Constant 12v Glove Compartment (Fuse Box)
|
|
02-01-2015, 08:37 PM | #1 |
Private First Class
11
Rep 185
Posts |
Constant 12v Glove Compartment (Fuse Box)
Hey Everyone,
I have a 2008 BMW 335i e92 and would like the communities assistance with locating a constant 12v source. The reason I will require this in my glove box is because I recently purchased the JB4 Mobile App for my apple iPhone and will require a cigarette lighter socket power source to power the bluetooth (USB) cable the JB4 module kit comes with. I have an aftermarket head-unit installed and had to remove my cigarette sockets from my dash and relocate my heated seat module there. I have installed a cigarette socket in my glove compartment and have connected the JB4 USB cable and mobile bluetooth cable inside. This provides a clean install, however, I notices that the power source I tapped into does not stay on constantly when driving, which causes the mobile app to disconnect. Below if a diagram from my fuse box: Could you guys please help me identify which power source I should tap into to ensure the bluetooth JB4 mobile module does not disconnect from my iPhone app. Thanks in advance for your help! |
02-01-2015, 09:34 PM | #3 |
Captain
435
Rep 686
Posts
Drives: 06 330xi (TRADED IN)
Join Date: Sep 2013
Location: Baconville, BN
|
While driving? Never heard of something like that happening, unless it was improperly sliced and has a bad connection. I'd say the radio power source (the constant 12V line) perhaps?
__________________
|
Appreciate
0
|
02-09-2015, 08:42 AM | #4 |
Second Lieutenant
98
Rep 298
Posts |
On my 09 328i I tapped fuse #83 for a constant source. Has worked great! The best part was the fuse slot was empty so I used a spade connector and slid it on in. (aww yea)
|
Appreciate
1
TheMidnightNarwhal2814.50 |
Bookmarks |
Thread Tools | Search this Thread |
|
|