|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Search | Today's Posts | Mark Forums Read |
|
BMW 3-Series (E90 E92) Forum
>
.
|
|
07-08-2015, 07:00 PM | #2 |
Lieutenant Colonel
169
Rep 1,596
Posts |
Its an electronic throttle body.
Diesels generally dont need throttles, but sometimes they are fitted to provide some extra features. Some cars for instance will shut the throttle when you turn the engine off, which makes it stop much smoother. Sometimes its used for EGR, by closing the main inlet path and thus forcing the engine to draw air in from the EGR system instead. I dont know what the M57 uses it for (probably both), nor if it flicking open and closed like that is normal. First port of call; scan the DDE for fault codes to see if it sheds any light! |
Appreciate
0
|
07-08-2015, 07:04 PM | #3 | |
Colonel
165
Rep 2,399
Posts |
Quote:
have scanned for codes and only 3 that come up are glowplugs. |
|
Appreciate
0
|
07-08-2015, 07:46 PM | #4 |
Colonel
165
Rep 2,399
Posts |
I've got error
3efb thermos her oelnivesensor (layer_toens) 4bb1 versorgungsspannung luftmassenmesser First one is showing oil lever sensor and second one is 4BB1 Air Flow Sensor Power Supply |
Appreciate
0
|
07-09-2015, 03:56 AM | #5 |
Lieutenant Colonel
97
Rep 1,568
Posts |
Raj, you probably need Steve (Old and Grey type) to pick up on this thread or you could try PM him!
__________________
Understeer is when you hit the wall with the front of the car, oversteer is when you hit the wall with the rear of the car.
Horsepower is how fast you hit the wall and torque is how far you take the wall with you" |
Appreciate
0
|
07-09-2015, 04:06 AM | #6 | |
Colonel
165
Rep 2,399
Posts |
Quote:
Didnt want to bother him as he probably gets a ton of pm's! |
|
Appreciate
0
|
07-09-2015, 04:35 AM | #7 |
Lieutenant Colonel
169
Rep 1,596
Posts |
Well if it was not supposed to be doing that, the ECU would (Should?) have noticed and produced a fault code.
So as theres no fault code relating specifically about the throttle, then i would guess that the ECU is intentionally opening and closing the flap. Its maybe related to the Air flow meter fault in some way? |
Appreciate
0
|
07-09-2015, 08:25 AM | #8 | |
Colonel
165
Rep 2,399
Posts |
Quote:
not sure if I need a new one or I can take that old one out and sort that thing from moving like that? |
|
Appreciate
0
|
07-09-2015, 09:52 AM | #9 |
Major
140
Rep 1,445
Posts |
I've seen this once before on m57,the feedback potentiometer in the throttle body was faulty causing it to constantly switch end stops.i don't know if you can read it with aftermarket diag stuff but you can see the readings with ISTA.
|
Appreciate
0
|
07-09-2015, 10:07 AM | #10 |
Colonel
165
Rep 2,399
Posts |
so do you think ill need a new throttle body? or can this one be taken off and adjusted or something to stop it moving like that?
|
Appreciate
0
|
07-09-2015, 10:13 AM | #11 |
Major
140
Rep 1,445
Posts |
No,there not serviceable.If it's the same fault I had before you can see the requested % vs the actual % and they where wildly different/constantly cycling.If you have a warranty then get them to sort it.
|
Appreciate
0
|
07-09-2015, 10:21 AM | #12 | |
Colonel
165
Rep 2,399
Posts |
Quote:
didn't quite get your response. so do I need a new throttle body? also looking online the member above mentioned electronic throttle body but I cant seem to find anything under electronic just throttle body etc. |
|
Appreciate
0
|
07-09-2015, 11:26 AM | #13 |
Colonel
657
Rep 2,445
Posts
Drives: 2018 630iGT sport
Join Date: Aug 2013
Location: Caloundra, Australia
|
"Not serviceable" usually means you need a new one mate.....I hate it when electronic stuff shits itself for no apparent reason, and usually at great expense.
|
Appreciate
0
|
07-09-2015, 02:43 PM | #14 | |
Major
140
Rep 1,445
Posts |
Quote:
Last edited by KM79; 07-09-2015 at 04:37 PM.. |
|
Appreciate
0
|
Bookmarks |
Thread Tools | Search this Thread |
|
|