[e90bmw328i]

I have a Hifi system and replaced the stock AMP with XD600/6v2. Is there a way to add center channel? If so, how is this connected at the AMP? I see technic mentioning something about CDT CS-256 but not much details there on this forum http://www.m3post.com/forums/showthr...0#post16131350 in the very end of first post.

Any suggestions? Should I connect the center channel in parallel with one of the fronts? or do I put the fronts and center in serial and bridge the front channels at the XD600?

[Wongway]

I guess my first question is going to be; "Why?"

Your music isn't recorded with a center channel in mind. There's no center channel signal coming from the head unit. Unless I missed that you installed a dolby prologic video system in your car...

[jeffb335]

No, center channels are typically only used when a processor is involved.....something to "create" a center.

[kaigoss69]

Just...don't.

[e90bmw328i]

Given all the audio experts are questioning this, it doesnt makes sense to add a center channel without a surround decode, i guess. Thanks for killing the idea

[Wongway]

If you really want to spend the money, get something like a Helix DSP and a proper installer to tune the sytem.

They can create the "illusion" of a center channel by properly delaying the left and right sides so that it sounds as if you're getting the information from the "center"