FMIC Installed!

oldslowInCalgary · 12-19-2015, 06:02 PM

All I can say is that there is a lot of fasteners, and ER is it too hard to include a couple pictures?
Over all went well. I struggled harder getting the charge pipe in last month!

Fred_Boosted · 12-19-2015, 09:50 PM

Yeah, they could give you more detailed instruction.

But here:
http://en.lmgtfy.com/?q=bmw+335i+intercooler+diy

oldslowInCalgary · 12-19-2015, 09:54 PM

Quote:

Originally Posted by Fred_Boosted

Yeah, they could give you more detailed instruction.

But here:
http://en.lmgtfy.com/?q=bmw+335i+intercooler+diy

My point was that it could have been provided in their instructions and I would not have to have done hours of googling and watching youtubes.

N54Society · 12-20-2015, 11:59 AM

Quote:

Originally Posted by oldslowInCalgary

My point was that it could have been provided in their instructions and I would not have to have done hours of googling and watching youtubes.

I agree. If you're paying that kind of money, it should come with some kind of documentation.

oldslowInCalgary · 12-20-2015, 03:37 PM

Quote:

Originally Posted by vbp6us

I agree. If you're paying that kind of money, it should come with some kind of documentation.

I hope i am clear here, they do have a decent write up, but as they say a picture is worth a thousand words...

mike@x-ph.com · 12-21-2015, 04:16 PM

How do you like the ER intercooler?

I have the same one on my car

Jeff@TopGearSolutions · 12-21-2015, 04:18 PM

Funny thing is most manufacturers don't include instructions, ER is actually the most detailed when it comes to instructions for their products.

oldslowInCalgary · 12-21-2015, 04:34 PM

Too muddy and cold to test.
Way more substantial than the original.
A couple pics would have saved one head scratching

Jeff@TopGearSolutions · 12-21-2015, 06:09 PM

Quote:

Originally Posted by oldslowInCalgary

Too muddy and cold to test.
Way more substantial than the original.
A couple pics would have saved one head scratching

I'm sure they'd appreciate the feedback. Even better if you could provide specifics or a picture to lend them for future instructions.

AK. · 12-22-2015, 04:55 AM

How much cutting did you have to do? I have an ER intercooler coming in too.

zerohellix · 12-22-2015, 08:29 AM

Here are a couple of videos I referenced to get my 7" VSRF Intercooler in below. Helped tremendously, but ended up making a custom mounting system since the holes didn't line up correctly.

PNWN54 · 12-22-2015, 02:30 PM

Love my ER intercooler! Solid stuff 👍🏻

Jeff@TopGearSolutions · 12-22-2015, 03:55 PM

Quote:

Originally Posted by AK.

How much cutting did you have to do? I have an ER intercooler coming in too.

It's about an inch or so.

Mike@N54Tuning.com · 12-22-2015, 04:05 PM

Quote:

Originally Posted by oldslowInCalgary

All I can say is that there is a lot of fasteners, and ER is it too hard to include a couple pictures?
Over all went well. I struggled harder getting the charge pipe in last month!

Which FMIC did you get? The ER Competition?

Mike

FL335 · 12-22-2015, 11:47 PM

I bought and installed a Mishimoto which works great and install was tit. I live in FL (HOT) and it helped ALOT. No problems here. If I had to do it all over again, a big VRSF would have been no problem.

Once you get under there, you can see where to cut and it's not a big deal. I bought the Mishismoto because the swap was easy and the cooling vs the larger one was negligible.

My .02. Merry Christmas!

BMSE92_Harry · 12-25-2015, 01:40 AM

Hi there, what part of FL beaches are you from? I live in Tampa.

oldslowInCalgary · 12-25-2015, 10:45 AM

Quote:

Originally Posted by Jeff@TopGearSolutions

It's about an inch or so.

It was actually less than an inch. About 3/4 inch...And nothing on the vertical sections.
It went in nice and snug. Wasnt hard fitting it using a jack to hold it up in place while playing around with getting it where it needed to be.

siphor1989 · 12-25-2015, 06:22 PM

Did you get the 5" or 7" core?

mike@x-ph.com · 12-25-2015, 06:52 PM

Quote:

Originally Posted by siphor1989

Did you get the 5" or 7" core?

the ER s only offered in one version . It is 6"

FL335 · 12-25-2015, 09:19 PM

Quote:

Originally Posted by Harrychiu012

Hi there, what part of FL beaches are you from? I live in Tampa.

I live in Jacksonville Beach.

As an aside, had I known in advance, I would have bought eh 7" and cut where needed simply to be done with it and have slightly better cooling.

I DO live the Mishimoto as fitiment is excellent. Also very easy install but the amount of cutting needed on the larger FMIC is minimal.

mike@x-ph.com · 12-25-2015, 09:28 PM

Quote:

Originally Posted by FL335

I live in Jacksonville Beach.

As an aside, had I known in advance, I would have bought eh 7" and cut where needed simply to be done with it and have slightly better cooling.

I DO live the Mishimoto as fitiment is excellent. Also very easy install but the amount of cutting needed on the larger FMIC is minimal.

Agree, the cutting part is very overrated

12-19-2015, 06:02 PM	#1
oldslowInCalgary Private 6 Rep 57 Posts Drives: 2011 Red 335iS Join Date: Dec 2014 Location: Calgary iTrader: (0)	FMIC Installed! All I can say is that there is a lot of fasteners, and ER is it too hard to include a couple pictures? Over all went well. I struggled harder getting the charge pipe in last month!
	Appreciate 0 Tweet Quote

12-19-2015, 09:50 PM	#2
Fred_Boosted Captain 91 Rep 632 Posts Drives: 335i Join Date: Nov 2011 Location: USA iTrader: (1) Garage List 2010 BMW 335i [8.00]	Yeah, they could give you more detailed instruction. But here: http://en.lmgtfy.com/?q=bmw+335i+intercooler+diy
	Appreciate 0 Quote

12-21-2015, 04:16 PM	#6
mike@x-ph.com BimmerPost Supporting Vendor 27444 Rep 196,865 Posts Drives: 07-335/12-328/18-M4/21-M4CP Join Date: Sep 2013 Location: Las Vegas iTrader: (23)	How do you like the ER intercooler? I have the same one on my car __________________ Check out our current sale by clicking on this link! https://x-ph.com/sale/ Phone number 702-494-9435
	Appreciate 0 Quote

12-21-2015, 04:18 PM	#7
Jeff@TopGearSolutions 3474 Rep 79,211 Posts Drives: C6 Z06, 09 335i, 10 335xi Join Date: Dec 2008 Location: www.TopGearSolutions.com iTrader: (37)	Funny thing is most manufacturers don't include instructions, ER is actually the most detailed when it comes to instructions for their products.
	Appreciate 0 Quote

12-21-2015, 04:34 PM	#8
oldslowInCalgary Private 6 Rep 57 Posts Drives: 2011 Red 335iS Join Date: Dec 2014 Location: Calgary iTrader: (0)	Too muddy and cold to test. Way more substantial than the original. A couple pics would have saved one head scratching
	Appreciate 0 Quote

12-22-2015, 04:55 AM	#10
AK. Lieutenant 138 Rep 592 Posts Drives: E90 M3/E92 M3 ZCP Join Date: Jan 2015 Location: California iTrader: (3) Garage List 2010 E90 335i [10.00]	How much cutting did you have to do? I have an ER intercooler coming in too.
	Appreciate 0 Quote

12-22-2015, 08:29 AM	#11
zerohellix Enlisted Member 17 Rep 36 Posts Drives: 2007 BMW 335i Join Date: Oct 2015 Location: USA iTrader: (0)	Here are a couple of videos I referenced to get my 7" VSRF Intercooler in below. Helped tremendously, but ended up making a custom mounting system since the holes didn't line up correctly. __________________ Mods - SSR Performance DCI, 19" Verde Wheels 8.5FW/9.5RW, G-MAX AS-03 235/265, MHD Stage 1 93 pump, LUX E90 V6 (Angel Eyes), SR 4" Exhaust Tips, 7" VSRF FMIC, VSRF 3" DP's, VHT Redlines, Blackout Grill Options - Adaptive Headlights, Heated Front Driver/Passenger Seats, Rear Foldable Seats (Trunk Access), Keyless Entry/locking, Keyless Ignition, Sun Roof
	Appreciate 0 Quote

12-22-2015, 02:30 PM	#12
PNWN54 MR. Rocket 47 Rep 398 Posts Drives: 2010 E92 335i M-Sport Join Date: May 2013 Location: Portland, OR iTrader: (2) Garage List 2010 E92 BMW 335i [0.00]	Love my ER intercooler! Solid stuff 👍🏻
	Appreciate 0 Quote

12-22-2015, 11:47 PM	#15
FL335 Banned 92 Rep 707 Posts Drives: 2009 335i Join Date: Oct 2013 Location: Florida Beaches iTrader: (0)	I bought and installed a Mishimoto which works great and install was tit. I live in FL (HOT) and it helped ALOT. No problems here. If I had to do it all over again, a big VRSF would have been no problem. Once you get under there, you can see where to cut and it's not a big deal. I bought the Mishismoto because the swap was easy and the cooling vs the larger one was negligible. My .02. Merry Christmas!
	Appreciate 0 Quote

12-25-2015, 01:40 AM	#16
BMSE92_Harry Captain 75 Rep 811 Posts Drives: 08 335i coupe Join Date: Oct 2013 Location: Tampa iTrader: (0)	Hi there, what part of FL beaches are you from? I live in Tampa.
	Appreciate 0 Quote

12-25-2015, 06:22 PM	#18
siphor1989 Lieutenant 207 Rep 569 Posts Drives: 2020 m340i xdrive Join Date: May 2015 Location: . iTrader: (3)	Did you get the 5" or 7" core?
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search