|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Search | Today's Posts | Mark Forums Read |
|
BMW 3-Series (E90 E92) Forum
>
Dual Meth
|
|
07-06-2016, 11:35 AM | #1 |
First Lieutenant
26
Rep 308
Posts |
Dual Meth
Hi Raj,
Just wanted to post a pic..
__________________
Jb4 with Trebila BEF,vargas stage 2+ turbos, vrsf dp's, vrsf cp with tial bov, vrfs 7" fmic, EOS PI with BMS PI controller, RB Inlets and Outlets, bms meth kit, BMS DCI, miltek cat back, bms occ,3.5 tmap, ngk 5992 plugs, HSD coilovers, M3 rear subframe, diff, drive shafts , suspension and brakes.
|
07-09-2016, 10:10 AM | #5 |
Lieutenant
189
Rep 585
Posts |
I think for dual setups, it's better to go with twin CM7s, which is what Russ is running.
Once I get the 2nd bung welded, I've got a CM10 at the moment, but will try with a CM5 too.
__________________
If its broke.. Mod it! if not, mod it anyway!
|
Appreciate
0
|
07-09-2016, 03:32 PM | #6 |
First Lieutenant
26
Rep 308
Posts |
Yep as Tinsta says I'm running DO7's. I think the Devils Own and Cool mist work out pretty much the same. I added the extra bung as I was having issues with my trims... Meth was flowing to bank 1 more than bank 2. I pleased to say the improved atomisation and position of the second Bing has improved the balance.
__________________
Jb4 with Trebila BEF,vargas stage 2+ turbos, vrsf dp's, vrsf cp with tial bov, vrfs 7" fmic, EOS PI with BMS PI controller, RB Inlets and Outlets, bms meth kit, BMS DCI, miltek cat back, bms occ,3.5 tmap, ngk 5992 plugs, HSD coilovers, M3 rear subframe, diff, drive shafts , suspension and brakes.
|
Appreciate
0
|
07-12-2016, 06:54 AM | #7 | |
Colonel
277
Rep 2,340
Posts |
Quote:
That's really interesting if it is because you'd think the meth would flow to 4,5,6 more easily with our manifold design. The mass of the meth would obviously not make it want to change direction and momentum. Angular acceleration etc. One chap did some flow simulations: http://dreamdesigndrive.blogspot.co....?view=flipcard I run a pair of CM7's guys and they are like a hose. Russ did a calc and I think they were spraying more than I need but I'm never going to complain about to much methanol I think a pair of cm5s was closer to what is suggested as ideal.
__________________
GC Turbos, FBO, JB4, DCT, Port Meth injection, BMS Charge Pipe, NGK plugs. EBC brakes and pads, LED Angel lights, LED foglights, LCI rears OCC, Braided brake lines. Custom Diff Lockdown Kit, VTT inlets, TMAP, stage 2+ fuel pump
11.79@119mph (stock turbos) 11.74@129mph (GC Turbos) |
|
Appreciate
0
|
07-12-2016, 08:18 AM | #8 |
Brigadier General
450
Rep 3,305
Posts |
I'm still torn whether to just go with the single CM10 to start with or straight to dual CM7's as both of yourselves (Jack/Russ) have had issues and had to go this route anyway.
__________________
E92 335i / M3 Hybrid - The Build
|
Appreciate
0
|
07-12-2016, 08:40 AM | #9 |
Colonel
277
Rep 2,340
Posts |
I went dual after reading about the issues people with singles were often having. The main benefit is that the duals produce a finer spray but if you had a big single as far away from the throttle body and manifold as possible, you'd probably be OK.
|
Appreciate
0
|
07-12-2016, 08:45 AM | #11 |
First Lieutenant
26
Rep 308
Posts |
You are correct Jack...Bank 1 was richer...now I'm using the DO7's the trims are much much closer!
Just looking back on the data..>Devils Own link the name with the flow so a DO7 flows at 441cc/min which works out at 7 US gallons, a DO10 is 10 US gallons and so on. Coolmists CM7 is actually flows at 10 US gallons per hour. So I'm pumping 14 US gallons per hour...a little more than a single CM10 (13 US gallons) http://www.promracing.com/methanol.php http://forums.nasioc.com/forums/show....php?t=2466060 http://www.methanol-injection.co.uk/...ion/nozzlecalc I think dual is better simply because of atomisation...not because you can push more in.
__________________
Jb4 with Trebila BEF,vargas stage 2+ turbos, vrsf dp's, vrsf cp with tial bov, vrfs 7" fmic, EOS PI with BMS PI controller, RB Inlets and Outlets, bms meth kit, BMS DCI, miltek cat back, bms occ,3.5 tmap, ngk 5992 plugs, HSD coilovers, M3 rear subframe, diff, drive shafts , suspension and brakes.
Last edited by russjonesr; 07-12-2016 at 09:02 AM.. |
Appreciate
0
|
07-12-2016, 11:17 AM | #13 | |
Colonel
277
Rep 2,340
Posts |
Quote:
That won't matter too much if you plan to dilute it down. I pay something like £1.55 a litre. I suppose it lasts around 3 months.
__________________
GC Turbos, FBO, JB4, DCT, Port Meth injection, BMS Charge Pipe, NGK plugs. EBC brakes and pads, LED Angel lights, LED foglights, LCI rears OCC, Braided brake lines. Custom Diff Lockdown Kit, VTT inlets, TMAP, stage 2+ fuel pump
11.79@119mph (stock turbos) 11.74@129mph (GC Turbos) |
|
Appreciate
0
|
07-12-2016, 11:46 AM | #14 |
Second Lieutenant
9
Rep 202
Posts |
I have a friend who uses it in his Supercharged E39 M5 at about the same rate (50/50mix) I do so we went halves on a barrel, financially it made sense as like you we were buying 20 to 25L each time we ordered.
|
Appreciate
0
|
07-13-2016, 06:33 AM | #15 | |
First Lieutenant
26
Rep 308
Posts |
Quote:
I wouldn't be happy storing that much fuel in my garage There maybe a clause in your home insurance? Plus a 20L drum last me around 8 months...
__________________
Jb4 with Trebila BEF,vargas stage 2+ turbos, vrsf dp's, vrsf cp with tial bov, vrfs 7" fmic, EOS PI with BMS PI controller, RB Inlets and Outlets, bms meth kit, BMS DCI, miltek cat back, bms occ,3.5 tmap, ngk 5992 plugs, HSD coilovers, M3 rear subframe, diff, drive shafts , suspension and brakes.
|
|
Appreciate
0
|
07-13-2016, 07:28 AM | #16 | |
Colonel
277
Rep 2,340
Posts |
Quote:
Come on Russ. You can do better haha!
__________________
GC Turbos, FBO, JB4, DCT, Port Meth injection, BMS Charge Pipe, NGK plugs. EBC brakes and pads, LED Angel lights, LED foglights, LCI rears OCC, Braided brake lines. Custom Diff Lockdown Kit, VTT inlets, TMAP, stage 2+ fuel pump
11.79@119mph (stock turbos) 11.74@129mph (GC Turbos) |
|
Appreciate
0
|
07-13-2016, 07:34 AM | #17 |
Second Lieutenant
9
Rep 202
Posts |
Haha I would dream of storing that much at home! No my mate that I share the drum with has a commercial garage with secure storage for drums like this. I can just fill up or collect as I need it, just works out much cheaper for us this way
|
Appreciate
0
|
07-13-2016, 07:37 AM | #18 |
Second Lieutenant
9
Rep 202
Posts |
|
Appreciate
0
|
07-13-2016, 08:33 AM | #19 |
First Lieutenant
26
Rep 308
Posts |
You two have a heavy right foot
I know Jack will race a disability scooter
__________________
Jb4 with Trebila BEF,vargas stage 2+ turbos, vrsf dp's, vrsf cp with tial bov, vrfs 7" fmic, EOS PI with BMS PI controller, RB Inlets and Outlets, bms meth kit, BMS DCI, miltek cat back, bms occ,3.5 tmap, ngk 5992 plugs, HSD coilovers, M3 rear subframe, diff, drive shafts , suspension and brakes.
|
Appreciate
0
|
07-13-2016, 10:28 AM | #20 | |
Colonel
277
Rep 2,340
Posts |
Quote:
Did I post this before? Postman Pat is actually a race gokart.
__________________
GC Turbos, FBO, JB4, DCT, Port Meth injection, BMS Charge Pipe, NGK plugs. EBC brakes and pads, LED Angel lights, LED foglights, LCI rears OCC, Braided brake lines. Custom Diff Lockdown Kit, VTT inlets, TMAP, stage 2+ fuel pump
11.79@119mph (stock turbos) 11.74@129mph (GC Turbos) |
|
Appreciate
0
|
Bookmarks |
Thread Tools | Search this Thread |
|
|