USB extension cable

xyzed · 10-21-2016, 05:04 PM

Was wondering if anyone has experience with adding an extension cable to a coding cable. I want to use a shelf located about 6' away from my car.
Wondering if a 9' cable extension might cause signal degradation?

opjose · 10-21-2016, 11:00 PM

If I remember correctly USB cables are limited to 16' end to end, including extensions. Beyond that you are supposed to use something to recondition the signal.

That said, you could try it and before coding, just make sure that you have no problems what-so-ever reading out as many modules as possible.

xyzed · 10-22-2016, 02:40 PM

Quote:

Originally Posted by opjose

If I remember correctly USB cables are limited to 16' end to end, including extensions. Beyond that you are supposed to use something to recondition the signal.

That said, you could try it and before coding, just make sure that you have no problems what-so-ever reading out as many modules as possible.

3meter cable and the 4' of OBD will work

10-21-2016, 05:04 PM	#1
xyzed Private 13 Rep 86 Posts Drives: 2009 328i E92 Join Date: Aug 2016 Location: AZ iTrader: (0)	USB extension cable Was wondering if anyone has experience with adding an extension cable to a coding cable. I want to use a shelf located about 6' away from my car. Wondering if a 9' cable extension might cause signal degradation? Last edited by xyzed; 10-21-2016 at 10:41 PM..
	Appreciate 0 Tweet Quote

10-21-2016, 11:00 PM	#2
opjose Major 244 Rep 1,374 Posts Drives: 335xi Join Date: May 2016 Location: Md iTrader: (0)	If I remember correctly USB cables are limited to 16' end to end, including extensions. Beyond that you are supposed to use something to recondition the signal. That said, you could try it and before coding, just make sure that you have no problems what-so-ever reading out as many modules as possible.
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search