|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Search | Today's Posts | Mark Forums Read |
|
BMW 3-Series (E90 E92) Forum
>
29E0 and 2A2B, DME: Mixture Control. Log check? Bad precat o2s?
|
|
08-02-2017, 04:26 PM | #1 |
Lieutenant
233
Rep 566
Posts |
29E0 and 2A2B, DME: Mixture Control. Log check? Bad precat o2s?
2009 335i, 78k miles. First time taking a log in this car, didn't really get a full pull but hopefully it will do. Trying to figure out where these codes are stemming from & what its effect on my car is. Currently on map 0.
Can post some more normal driving logs if that's preferred. Also, is it possible to get stft/trim on both banks using jb4? http://www.datazap.me/u/nissubaru/lo...21-24-27-28-29 My best guess is the precat oxygen sensors are bad, previous owner ran a lot of E85 if that matters. I'm running straight 93 nowadays and on a stock backend flash. Car is FBO with downpipes but never had this problem until now. Or boost/vacuum leak? I'm new to reading these logs but it does seem to be running kinda lean under boost, but nothing crazy. I did have the intake manifold pulled up enough to do the alternator recently and the codes showed up shortly after. Trims also seem okay from what I cant tell. |
08-03-2017, 02:02 PM | #2 |
Lieutenant
233
Rep 566
Posts |
Another log
https://drive.google.com/file/d/0B4i...ew?usp=sharing or http://www.datazap.me/u/nissubaru/lo...0&data=4-11-18 Also, having trouble with the JB4 program a little bit... For some reason I'm not getting any values on AFR2. And I also cannot get 6-cyl logging even though I have it set to "5" for IJE0S. Last edited by nissubaru; 08-03-2017 at 11:31 PM.. |
Appreciate
0
|
08-12-2017, 12:11 PM | #3 |
Lieutenant
233
Rep 566
Posts |
Replaced precat o2s and cleared codes. Have driven probably 20 miles and no codes have come back yet. Couldn't clear them for shit before.
I also put my stock downpipes back on but for other reasons. Same post cat sensors though |
Appreciate
0
|
Bookmarks |
Thread Tools | Search this Thread |
|
|