Angel Eyes Blinking Issue

buly34 · 09-21-2017, 10:49 PM

So my headlights are having an issue where the angel eyes blink, but only while the car is running. I have had LUX LED bulbs installed for about 2 years, I will randomly get a Bulb with an exclamation point warning light but thats all. No stored codes or issues with any other lights on the car. Check out the video below to see the issue.

46m3csl · 09-21-2017, 11:17 PM

You might need to code the resistor out or code the check bulb light. They also might be defective since it just started happening.

buly34 · 09-22-2017, 06:17 AM

How would I go about coding them? Also the fact that it only happens while the car is running confuses me.

zooch7 · 09-22-2017, 10:38 AM

Mine does this as well. You have to have it coded. Usually dealership.

buly34 · 09-22-2017, 10:51 AM

Quote:

Originally Posted by zooch7

Mine does this as well. You have to have it coded. Usually dealership.

It just seems odd that they didn’t do this for the last two years while they were installed, that’s why I feel like coding them is not the issue. And like I said, when the car is off but the lights are still on they do not blink..

zooch7 · 09-22-2017, 11:30 AM

Yeah agreed. I don't mind it, I run with halos and fog lights on all the time. I have the LUX halos and LED fog lights

opjose · 09-22-2017, 02:56 PM

Police vehicle coding?

Pierre26 · 09-22-2017, 04:22 PM

I have also sometime (only one, the right) doing this, i think this is only security about over heating/voltage. I 'm not a spec but if you can find some around you to calibrate the voltage or changing resistor on the PCB. As you told only with engine running means that Voltage is higher and this is the result. First try with a Voltmeter (if i'm right).

buly34 · 09-23-2017, 12:59 PM

Quote:

Originally Posted by BimmerGeeks

Get em coded...

They've been on the car for 2 years and never had this issue until 2 weeks ago so I don't think coding is an issue

Chappers 71 · 09-23-2017, 01:27 PM

Quote:

Originally Posted by buly34

They've been on the car for 2 years and never had this issue until 2 weeks ago so I don't think coding is an issue

I had this a few months ago, & ended up replacing the LEDs. They had been installed for four years or so.
When fitting the new bulbs i actually took the time to read the installation guide this time & it said to fit the control unit's which I took to mean the ballasts outside of the headlight unit to avoid overheating & premature failure.
I couldn't find a suitable place for the ballast so I just left them inside the headlight housing. I suspect they will fail again sometime in the future.

mike@x-ph.com · 09-26-2017, 08:21 PM

Check with LUX

09-21-2017, 10:49 PM	#1
buly34 First Lieutenant 116 Rep 342 Posts Drives: 2007 e90 335xi 6MT Join Date: Oct 2014 Location: Pennsylvania iTrader: (0)	Angel Eyes Blinking Issue - VIDEO IN POST So my headlights are having an issue where the angel eyes blink, but only while the car is running. I have had LUX LED bulbs installed for about 2 years, I will randomly get a Bulb with an exclamation point warning light but thats all. No stored codes or issues with any other lights on the car. Check out the video below to see the issue. __________________ 2007 E90 335xi \| 400WHP // 430WTQ
	Appreciate 0 Tweet Quote

09-21-2017, 11:17 PM	#2
46m3csl Captain 127 Rep 774 Posts Drives: 335i Join Date: May 2010 Location: Rowland Heights iTrader: (0)	You might need to code the resistor out or code the check bulb light. They also might be defective since it just started happening.
	Appreciate 0 Quote

09-22-2017, 06:17 AM	#3
buly34 First Lieutenant 116 Rep 342 Posts Drives: 2007 e90 335xi 6MT Join Date: Oct 2014 Location: Pennsylvania iTrader: (0)	How would I go about coding them? Also the fact that it only happens while the car is running confuses me. Last edited by buly34; 09-22-2017 at 07:05 AM..
	Appreciate 0 Quote

09-22-2017, 10:38 AM	#4
zooch7 Private First Class 22 Rep 100 Posts Drives: 08 335i Join Date: Jun 2016 Location: Eugene, OR iTrader: (0)	Mine does this as well. You have to have it coded. Usually dealership.
	Appreciate 0 Quote

09-22-2017, 11:30 AM	#6
zooch7 Private First Class 22 Rep 100 Posts Drives: 08 335i Join Date: Jun 2016 Location: Eugene, OR iTrader: (0)	Yeah agreed. I don't mind it, I run with halos and fog lights on all the time. I have the LUX halos and LED fog lights
	Appreciate 0 Quote

09-22-2017, 02:56 PM	#7
opjose Major 244 Rep 1,373 Posts Drives: 335xi Join Date: May 2016 Location: Md iTrader: (0)	Police vehicle coding?
	Appreciate 0 Quote

09-22-2017, 04:22 PM	#8
Pierre26 Private First Class 20 Rep 105 Posts Drives: 2009-335D Pack M Join Date: Jun 2014 Location: France iTrader: (0)	I have also sometime (only one, the right) doing this, i think this is only security about over heating/voltage. I 'm not a spec but if you can find some around you to calibrate the voltage or changing resistor on the PCB. As you told only with engine running means that Voltage is higher and this is the result. First try with a Voltmeter (if i'm right).
	Appreciate 0 Quote

09-26-2017, 08:21 PM	#11
mike@x-ph.com BimmerPost Supporting Vendor 27220 Rep 196,400 Posts Drives: 07-335/12-328/18-M4/21-M4CP Join Date: Sep 2013 Location: Las Vegas iTrader: (23)	Check with LUX __________________ Check out our current sale by clicking on this link! https://x-ph.com/sale/ Phone number 702-494-9435
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search