[MrAC]

I purchased a set of coilovers and had them installed at a shop last season.
I just bought a set of new wheels and would like to adjust the height accordingly.

I've searched the forums but haven't found anything recent that was detailed.
I am learning and would like DIY tips/help.

Now, I know there's a coilover wrench that came with the kit.

Do I just simply turn the collar on both fronts and rears to adjust the height?

Also, is turning right = raising the height
turning left = lowering the height?

Any help would be greatly appreciated.

Thanks!!

[lnxguy]

Clockwise = lower, counter clockwise = raise.

[chris@strutmonkey]

This is correct. Some models have an allen screw on the perch you need to loosen first. And adjust when the car is on jacks to take weight off springs = makes it easier.

Originally Posted by lnxguy

Clockwise = lower, counter clockwise = raise.

[MrAC]

Originally Posted by chris@strutmonkey

This is correct. Some models have an allen screw on the perch you need to loosen first. And adjust when the car is on jacks to take weight off springs = makes it easier.

Late reply, but what;s the best thing to do if the rear perch is spinning as well?