[phinwood1]

Hey all, E90 idrive packed up so have replaced it with one from an E92, as you can imagine some of the menus are slightly different. can anybody here walk me through using ncs expert to do the following

1 - change the VIN# to my cars original

2 - bluetooth module is fitted to the car and is active on new ccc but its showing the one from the car previous not the one that is actually fitted to my car. i need to get the current module coded in

3 - i have factory fitted AUX but its greyed out in entertainment menu

4 - tyre pressure is fitted from factory but is also greyed out and needs to be enable.

5 - not a big deal but reverse sensors are also showing a picture of an m3 ( dont mind this haha) but it shows front sensors which are not present. not a deal breaker would would be good to remove.

This is all i have found so far everything else seems to worjk

All help will be great

Thanks

[nicefighter80]

Most of your issues can be solved by writing the VO to the new CCC.

http://codinge90.com/ncs-expert-how-...vehicle-order/

Just FA-Write the ccc in NCS expert.