help diagnose part replacement w/inpa or in need of remote coding

vr4spd · 07-03-2018, 10:49 PM

So a few weeks my 2011 335IS starting displaying the DSC trifecta "DSC inactive" "Start off assistance inactive" "Dynamic Break control Malfunction" "ABS inactive" Ive scanned and cleared codes with inpa but they come right back. Can some one tell me what I can scan or how I can determine what I need to replace using INPA or remote login and check it out? Thank you

RocketSurgeon · 07-03-2018, 10:54 PM

ISTA+ offers far better diagnostic capabilities than INPA. It should be fairly straight forward to read off the codes with INPA, then find translations.
Can you post up the codes you are getting?
Do you have the bimmergeeks standard tools installation?

vr4spd · 07-03-2018, 11:09 PM

I tried installing insta from the bimmergeeks and couldn't get it running correctly. but otherwise yes I do have their standard tools installed let me co grab the codes rq.

vr4spd · 07-03-2018, 11:50 PM

I get the 5DD2 code Every time. only mods I have are DCI, BMW CP, MHD flash

RocketSurgeon · 07-04-2018, 04:43 AM

Ok, that code translates as "hydraulic unit: valve calibration."
The good news is that code can likely be resolved simply by running the DSC calibration. That will unfortunately require ISTA+.
I can remotely help you get ISTA+ setup correctly. I might need to send you an older version, since the new versions don't get along well with K+DCAN.

07-03-2018, 10:49 PM	#1
vr4spd Private First Class 8 Rep 132 Posts Drives: E93 335is Sapphire Black Join Date: Dec 2010 Location: California iTrader: (0)	help diagnose part replacement w/inpa or in need of remote coding So a few weeks my 2011 335IS starting displaying the DSC trifecta "DSC inactive" "Start off assistance inactive" "Dynamic Break control Malfunction" "ABS inactive" Ive scanned and cleared codes with inpa but they come right back. Can some one tell me what I can scan or how I can determine what I need to replace using INPA or remote login and check it out? Thank you __________________ Present garage 2011 335is ,2006 Range Rover sport SC, 2005 GSXR-750, 2003 Jeep Wrangler Retired/sold 2009 e92 m3-totaled, 2008 e92 , 335i fbo ,2011 ZCP e92 m3, 2007 E60 M5, 2008 ZO6 C6 Vette, 2006 evolution MR, 1999 VR-4
	Appreciate 0 Tweet Quote

07-03-2018, 10:54 PM	#2
RocketSurgeon Lieutenant 263 Rep 459 Posts Drives: 2008 135i Manual, CBR650F Join Date: Jan 2017 Location: NC iTrader: (0)	ISTA+ offers far better diagnostic capabilities than INPA. It should be fairly straight forward to read off the codes with INPA, then find translations. Can you post up the codes you are getting? Do you have the bimmergeeks standard tools installation?
	Appreciate 0 Quote

07-03-2018, 11:09 PM	#3
vr4spd Private First Class 8 Rep 132 Posts Drives: E93 335is Sapphire Black Join Date: Dec 2010 Location: California iTrader: (0)	I tried installing insta from the bimmergeeks and couldn't get it running correctly. but otherwise yes I do have their standard tools installed let me co grab the codes rq. __________________ Present garage 2011 335is ,2006 Range Rover sport SC, 2005 GSXR-750, 2003 Jeep Wrangler Retired/sold 2009 e92 m3-totaled, 2008 e92 , 335i fbo ,2011 ZCP e92 m3, 2007 E60 M5, 2008 ZO6 C6 Vette, 2006 evolution MR, 1999 VR-4
	Appreciate 0 Quote

07-03-2018, 11:50 PM	#4
vr4spd Private First Class 8 Rep 132 Posts Drives: E93 335is Sapphire Black Join Date: Dec 2010 Location: California iTrader: (0)	I get the 5DD2 code Every time. only mods I have are DCI, BMW CP, MHD flash Attached Images __________________ Present garage 2011 335is ,2006 Range Rover sport SC, 2005 GSXR-750, 2003 Jeep Wrangler Retired/sold 2009 e92 m3-totaled, 2008 e92 , 335i fbo ,2011 ZCP e92 m3, 2007 E60 M5, 2008 ZO6 C6 Vette, 2006 evolution MR, 1999 VR-4
	Appreciate 0 Quote

07-04-2018, 04:43 AM	#5
RocketSurgeon Lieutenant 263 Rep 459 Posts Drives: 2008 135i Manual, CBR650F Join Date: Jan 2017 Location: NC iTrader: (0)	Ok, that code translates as "hydraulic unit: valve calibration." The good news is that code can likely be resolved simply by running the DSC calibration. That will unfortunately require ISTA+. I can remotely help you get ISTA+ setup correctly. I might need to send you an older version, since the new versions don't get along well with K+DCAN.
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search